Blue Cruise 1.4.x : IPMA 24.204.10.9

[BSEE SPARKY]

Ok, I see when I can.

I was able to give a small check today.
Results:
1. The predictive speed assist was toggled to off position. All others were unchanged and turned on.
2. Lane centering seemed to work as it always did. No change.
3. Predictive Speed Assist worked with no changes. It still sees HWY marker signs as speed limit signs and adjusts the speed to match that as opposed to actual speed limit. It readjusts to proper speed limit at next speed limit sign. No change from previous.
4. Blue Cruise seemed to have all functions of 1.4. However I didn't try lane positioning next to wide load vehicles. Automated lane changed worked. I used the turn signal and truck changed lanes. This worked to both left and right. No changes noted.

Sponsored

 

[SomeStupidDriver]

Got this just now in 22 Plat, I also was already on 1.4 prior to the update.

 

[MidAtlanticLightningClub]

I was able to give a small check today.
Results:
1. The predictive speed assist was toggled to off position. All others were unchanged and turned on.
2. Lane centering seemed to work as it always did. No change.
3. Predictive Speed Assist worked with no changes. It still sees HWY marker signs as speed limit signs and adjusts the speed to match that as opposed to actual speed limit. It readjusts to proper speed limit at next speed limit sign. No change from previous.
4. Blue Cruise seemed to have all functions of 1.4. However I didn't try lane positioning next to wide load vehicles. Automated lane changed worked. I used the turn signal and truck changed lanes. This worked to both left and right. No changes noted.

Still no lane centering while towing (used to function before BC 1.4).

 

[fhteagle]

My 22 Lariat (re) installed this last night. It already had BC1.4 though. I get to check all my settings again. Yay.

Sponsored