Sponsored
rugedraw's latest activity
-
If the option to install now is now greyed out, you will need to wait for a new download to be sent, and by then the install might be... -
rugedraw replied to the thread Lightning Software Updates using FDRS.To anyone on the fence about doing updates but not wanting to spend $600 on the cable needed to do so, the waiting list to borrow one of...
-
rugedraw replied to the thread Bluecruise Stopped Working | Fixed Post #12.I asked because I would need to see the config on your truck in case the data online is not accurate. I don't see any reason why it...
-
rugedraw replied to the thread Bluecruise Stopped Working | Fixed Post #12.Yea, I saw your BC is active and yes you are supposed to have land centering with hands free there. Do you have FORScan?
-
rugedraw replied to the thread Bluecruise Stopped Working | Fixed Post #12.And your confident that you have all the driver assist settings relevant to BC turned on?
-
rugedraw replied to the thread Bluecruise Stopped Working | Fixed Post #12.@southern_cyclone Got your message. Your truck is not reporting any codes that would indicate a problem with BC. Also, all the config...
-
rugedraw replied to the thread Bluecruise Stopped Working | Fixed Post #12.Message me the VIN and I can take a look and see if I see anything helpful.
-
rugedraw reacted to Ricks Lightning's post in the thread Finally got the BlueCruise 1.4 OTA update (23 Lariat ER) with
Haha.
My 24 flash got it last week on its 1 year anniversary. Took a 180 mile trip on Saturday and it was incredible. And a 120 mile trip... -
rugedraw reacted to Kansan's post in the thread Bluecruise Stopped Working | Fixed Post #12 with Like.
Just don’t disconnect in the middle of an OTA update.
-
rugedraw reacted to Jesse-Infotainment's post in the thread 360 Cameras no longer working with Like.
Any of the front cameras with an error like that will cause all the cameras to not work. You can disconnect the right camera pretty...
-
I wanted to give an update. Thank you to @Jesse-Infotainment and his guidance. I disconnected the right camera coax from the pillar and...
-
Last update hopefully. Looks like I have managed to fix it. I took apart the sideview mirror and cleaned all the contacts with alcohol...
-
rugedraw reacted to RocketGhost's post in the thread New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9 with Like.
After seeing others report getting 1.4 today I checked my truck and lo and behold my number finally came up! Maybe I should go buy a...
-
rugedraw replied to the thread Uploading AS-BUILT file error.The truck is only reporting a few stored codes, but no active faults and the old stored codes don't seem relevant to your issue. No idea...
-
rugedraw reacted to TaxmanHog's post in the thread New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9 with Like.
Yes, I've taken the Mrs. out to lunch, this popped up when I parked the truck, I'll install it later after we're home...
-
rugedraw replied to the thread Uploading AS-BUILT file error.When you plugged in to FORScan, was it showing any codes? If your Fordpass is connected, message me the VIN and I can check.
-
sounds convincing, gonna try it this evening, but i warn you, if this doesn't work, i'm going to find you...(Liam Neilsen voice). lol...
-
Done! I was able to update. I went ahead and just retuned to original the same section in each of the modules needed for the GlareFree...
-
rugedraw reacted to TaxmanHog's post in the thread New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9 with Like.
NO, there is no LVB conditions for "receiving" the update package, but installing it is when the LVB condition can be a barrier, so...
-
rugedraw replied to the thread New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9.That is correct. If the LVB does not meet the proper specs in terms of charge, capacity, temperature, BMS data quality and perhaps a few...
-
rugedraw reacted to RocketGhost's post in the thread New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9 with Like.
My understanding is that there is a threshold LVB charge to initiate an update. If the LVB is below the threshold, will the truck still...
-
rugedraw reacted to norpan's post in the thread F150 Lightning FORScan thread - Version 2 with Like.
The no name OTA might be because the APIM is in Norwegian? Thanks a lot! Yes I do.
-
rugedraw replied to the thread Bluecruise Stopped Working | Fixed Post #12.Just get one of these...
-
rugedraw reacted to roscoe's post in the thread Bluecruise Stopped Working | Fixed Post #12 with Like.
Thanks all. 12v disconnect likely fixed this. Upon reconnecting: -FordPass app updated to current charge rate -software Update screen...
-
rugedraw replied to the thread F150 Lightning FORScan thread - Version 2.Got your message. Strange that it appear as a no-name update. OTA dashboard shows it is the regular BC 1.4 update every one gets. I...
-
-
rugedraw replied to the thread F150 Lightning FORScan thread - Version 2.Send me the VIN. I'll look into it later.
-
rugedraw reacted to norpan's post in the thread F150 Lightning FORScan thread - Version 2 with Like.
Quick update - got an OTA (with no release notes, might be due to the truck being in Norwegian now 🤔) and after this I can activate lane...
-
No, you are not modifying ANY of the software here, this is just configuration. In most all cases (I've seen) you can actually mess up...
-
rugedraw replied to the thread New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9.Drove us crazy on the ICE F150 forum when it came out. Jesse and I rolled a few trucks back to the old software thinking Ford botched...
-
rugedraw reacted to Timeless Epoch's post in the thread New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9 with Haha.
Testing... Update: Confirmed, rebel mode canceled. Appreciate it @rugedraw.
-
rugedraw replied to the thread New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9.Cancel your appt and....... The new IPMA software requires the driver to be wearing the seatbelt for lane centering and BC to work.
-
-
rugedraw reacted to TaxmanHog's post in the thread New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9 with Haha.
-
rugedraw replied to the thread Bluecruise Stopped Working | Fixed Post #12.Disconnect the negative cable from your 12v battery for 20 minutes. Once you reconnect it, check for updates again to see if it makes it...
-
rugedraw replied to the thread Bluecruise Stopped Working | Fixed Post #12.The thing is, your truck last reported itself to the cloud on 9/1; it did not report any data yesterday to see if any codes are there...
-
rugedraw replied to the thread Uploading AS-BUILT file error.When you load FORScan and it asks you if you want to load the existing profile, select no so it does a fresh scan. Then check to see if...
-
rugedraw replied to the thread Can't update SCCM.At this point, I would consider side-loading it, but I will wait for Jesse to chime in to see what he thinks.
-
rugedraw replied to the thread Bluecruise Stopped Working | Fixed Post #12.@roscoe Were you wearing your seatbelt while trying to use BC? Was lane change assist working for you when BC did work?
-
rugedraw replied to the thread Bluecruise Stopped Working | Fixed Post #12.@roscoe Message me the VIN. Edit: Never mind.....I have it. Give me a bit.
-
rugedraw replied to the thread F150 Lightning FORScan thread - Version 2.In regards to this, it will not work over there. I have tried many times with the Mach E's to get lane change to work over there, but...
-
rugedraw replied to the thread Camera alert on rear facing camera.That change is to enable cameras in motion. To get rid of the full view not available, this is what you need to do:
-
-
rugedraw reacted to Old Aviator's post in the thread Thanks Ford for the improved hands-on-wheel detection; Advanced Driver Assistance System update (24-PU0105-CMR-FX) with Wow.
Unfortunatly Harry was mislead on one point. While its true helicopters don’t glide they can autorotate which is a form of gliding...
-
rugedraw replied to the thread Thanks Ford for the improved hands-on-wheel detection; Advanced Driver Assistance System update (24-PU0105-CMR-FX).Well, there is a new CMR update that popped up in FDRS first for the Mach E and also for the Lightning. I wonder if this is the new...
-
rugedraw replied to the thread Can't update SCCM.I would just try to update it to see what happens and take it from there.
-
Hey @rugedraw and @Jesse-Infotainment you guys are great. I just finished configuring with forscan the IPMA and IPC to enable glare...
-
rugedraw replied to the thread Can't update SCCM.Yes, it is possible the IPMA update reverted the change that enables glare free. Easy enough to check and hopefully it is as easy as that.
-
lOOKING AT YOUR TRUCK.. If you have Glare Free enabled.. It isnt enabled in the IPMA. That would cause a 2101
-
rugedraw replied to the thread Software update check hangs.Yes, all modules. I would recommend 20 minutes, though.
-
10 mm wrench to disconnect the negative on the 12v battery for about 10 minutes.
-
rugedraw replied to the thread Can't update SCCM.You trust the online data, or do you want the OP to pull the entire abt file directly off his truck with FORScan? Edit: @walanis Grab...
-
iLL LOOK AT THE AS BUILD. I read he made some changes for Glare Free.. Basically need to make sure the SCCM matches 100% what someone...
