Adding SecuriCode to Pro?

[Gnarwhl]

I bought the same thing, except for cars without remote start since my key fob doesn't have remote start on it and I figure this is just another key fob. My dealer CANNOT figure out how to program it to the car. Anyone know how?

Did your dealer ever figure it out? My dealer can't figure it out either...

Sponsored

 

[asianman35]

Did your dealer ever figure it out? My dealer can't figure it out either...

nope, i just did the hardwire one.

 

[BennyTheBeaver]

Pressing 7/8 after entering code will open Frunk.
Pressing 3/4 after entering code unlocks rest of doors other than drivers door.

All my doors unlock when I enter my code, there is no need for me to press 3/4.

It might be because I have it set that all doors unlock vs just the driver door when I send an unlock command (via app or keyfob).

 

[astricklin]

On my old mountaineer, pressing 3 at the end unlocks all the rest of the doors. Then pressing 7/8 and 9/0 together locks the doors.

 

[jimfigler]

All my doors unlock when I enter my code, there is no need for me to press 3/4.

It might be because I have it set that all doors unlock vs just the driver door when I send an unlock command (via app or keyfob).

Only my driver unlocks but if I hit the top two buttons (maybe only one needs pressed) right after then all doors unlock. it must be a settings thing

 

[BennyTheBeaver]

Only my driver unlocks but if I hit the top two buttons (maybe only one needs pressed) right after then all doors unlock. it must be a settings thing

Yes. If you change what the unlock command does in the Locks or Doors setting the SecuriCode keypad mimicks it. I have mine set to unlock all doors on an unlock command.

 

[jimfigler]

Did your dealer ever figure it out? My dealer can't figure it out either...

supposedly that stick on keypad just needs programmed like a new key fob. I recall seeing some youtube videos on it

 

[jimfigler]

Yes. If you change what the unlock command does in the Locks or Doors setting the SecuriCode keypad mimicks it. I have mine set to unlock all doors on an unlock command.

I may do that as the wife is impatient and yanks on the locked passenger door handle

 

[BennyTheBeaver]

I may do that as the wife is impatient and yanks on the locked passenger door handle

Yep, I have 2 little ones that do the same thing.

 

[KurtsRPMGarage]

I successfully installed the wired keypad on my truck. Also put it on video for anyone interested on giving this a go in the future.

 

[Shady]

I successfully installed the wired keypad on my truck. Also put it on video for anyone interested on giving this a go in the future.

Thanks for this will help a ton when I actually attempt it

 

[KurtsRPMGarage]

Thanks for this will help a ton when I actually attempt it

Happy to help. Couldn’t have done it without this forum thread.

 

[F150Blue]

Happy to help. Couldn’t have done it without this forum thread.

where did you get forscan?

 

[KurtsRPMGarage]

where did you get forscan?

I used this plug into a windows laptop Here

then you can download for scan Here

 

[hringrose]

supposedly that stick on keypad just needs programmed like a new key fob. I recall seeing some youtube videos on it

FYI, my local dealer was unable to install the stick on keypad, but when I used the website to find a dealer to install ($20) they were able to install the pad.

Sponsored