2021+ F-150 FORScan List / Database / Spreadsheet ?

[tonesto7]

My guess would be that it is possible but there is probably no one looking into figuring it out. If you were a Forscan guru, you might be able to figure it out. For me, I’m at the mercy of those who have the knowledge and time to figure stuff out lol.

I don't think there are any adjustments for the volume of the propulsion sound. I think it's just an audio calibration in the ACM module.

Sponsored

 

[Bryan Simon]

Might get to play with this stuff today.
The bluetooth adapter claims it will be fine for GM stuff for reading and testing.
The box this OBDLink MX+ came in rivals a good jewelry store box

 

[tonesto7]

Might get to play with this stuff today.
The bluetooth adapter claims it will be fine for GM stuff for reading and testing.
The box this OBDLink MX+ came in rivals a good jewelry store box

Wow my MX+ didn't come with a case when I ordered 1+ years ago.
I really don't use the MX+ much for Forscan. I use my EX or UCDSv4 adapters most of the time.

The MX+ really is such a good adapter though.
I really wish that forscan was updated to work with iOS/iPAD.

 

[ROBB1]

I know this will not be popular, and has been mentioned before, but has anybody seen a way to boost the fake engine noise sound? I actually like the concept and wish it was louder.

ACM

Fully agree. I, for one, would also like to know the answer to this. Sadly though, most questions I am curious about go unanswered in this forum. They like to focus on tire size and stuff here.

My guess would be that it is possible but there is probably no one looking into figuring it out. If you were a Forscan guru, you might be able to figure it out. For me, I’m at the mercy of those who have the knowledge and time to figure stuff out lol.

I don't think there are any adjustments for the volume of the propulsion sound. I think it's just an audio calibration in the ACM module.

I would agree with tonesto7, I do not think there is a volume adjustment for the engine sound enhancement, but if you want to experiment you can change the calibrations and see if it results in something you like better.

ACM
727-04-01 xxxx **xx xx

is the calibration for various engines. 00 is the V8 which gets nothing by default. Everything else is a different engine and probably various vehicles. One of them might result in a “louder“ experience.

 

[mhoffman54]

Well the mode is the same as the FX4 trucks, but it wouldn't be smart to drive in 4 low or 4 high while going to the grocery store on dry pavement.

Of course. Just wanted to make sure that it doesn't depend on special equipment in the FX4 to make it work. The LAST thing I want to do is add a drive mode a blow up my truck...

 

[davidb525]

When adding global windows I came across a couple things. I did have to add global windows to the APIM. Then had to turn the features on in setting/vehicle/windows. To close the windows I only have to press and hold the lock button once on the fob.

 

[Dwag21]

New to FORscan, in order to update the firmware to the latest version do I need to have the obdlinkex plugged into my truck and forscan running? I downloaded the firmware and didn’t have forscan open just the obdlink plug into my laptop and receive an error message saying wrong device. I’ve tried everthing looked for help in other threads and no luck so any help or thoughts would be appreciated

 

[seantrantham]

I ran the Forscan changes for the seat belt warning, the global windows, and Bambi Mode. Tried the temperature numbers in the cluster, but that one did not work, perhaps I have the wrong instrument cluster.

Anyone know how to make Eco Mode the default instead of normal?

 

[Hectort713]

2021 Ford F150 Tremor

Super Duty Full Brightness DRL - 726 - 42 - 01

x2x2 - xxxx - xxxx

My Tremor came with a 2K Generator, after I did the mod I got a message about my generator

Pro Power Onboard is currently unavailable. Reset the system using the SYNC screen. See owner’s manual for details.

After that I got another message,

Pro Power on board turned off.

Pro Power Onboard detected a ground fault. Reset the system using the SYNC screen.

Took it to ford service and I was informed that it’s a known software update issue, connect to Wifi and do an OTA update from home don’t have to go to any dealer, they gave me a print out about the recall. Will post a picture of the recall once I pick up my truck.

Ok I know it’s been a while now, but till now, I have not gotten any OTA updates, I have read some forums that people are receiving 1 or 2 updates, can any verify if this has fixed the…

Pro Power Onboard detected a ground fault.

 

[crsavage1]

Really dumb question, but I cannot see anything in the PCM Control Module programming. This is usually where I would turn on OCR (I have a Powerstroke) for manual Regen starts etc, but it is completely blank? My Forscan just says "Service procedure running" but just sits there. I asked on the Forscan forum and it seems nobody has any insight. Maybe PCM is not programmable yet? I checked on the spreadsheet and although PCM says "yes" the module is not actually listed below. Anyone had success with seeing the PCM module on their 21?

 

[tonesto7]

Request - can anyone with a 3.5 ecoboost Lariat or above post their configuration for this module:

ACM 727-01-01

The 3.5 eco has the best sound fake engine noise lol.

Here’s my ACM from my 502A with 3.5L

 

[GadgetB1]

I have some things to try so stay tuned on that but I need my new truck to finally get delivered and for FORScan to allow programming the other modules. Everything on my module spreadsheets is exact and specific to the 2021 F150 and not trial and error.

Found out the 2022 Superduty can use cameras while driving. I am searching the thread still, there are a lot of posts but anyone figured out how to disable the speed shutoff for cameras yet?

 

[mschiraldi]

Is there a way to turn on the puddle ligh(under mirror but not 360) when reversing? I find the 360 camera useless at night as you can’t see anything on the sides of the truck.

 

[9mmbullitt]

I can't find the info in this spreadsheet to change the turn signal from 3 flashes to more flashes. Where is it? Thanks.

 

[C. Mays]

I can't find the info in this spreadsheet to change the turn signal from 3 flashes to more flashes. Where is it? Thanks.

Page 3 within this thread. Post #33

Sponsored