3D Printing Fun

[AZT9]

I just finished printing one of these and it works perfectly. Thanks for the link.

Did you print in PLA?

Sponsored

 

[RLXXI]

Did you print in PLA?

PETG-CF. If it fails I'll do one up with PA6-GF. I doubt PLA would stand up to the heat.

 

[JohnsonEJ23]

I also wanted a slightly different design for the rear air diffusers.

These are more about slowing, and spreading the air, with a hint of style.

I like the looks of these! Is the STL file available somewhere?

 

[RLXXI]

I like the looks of these! Is the STL file available somewhere?

You didn't quote the persons post of the item you're wanting. What exactly did you like the look of?

 

[frappe33]

I'd love to print a cap for the drivers door handle lock. Something that matches the body color. Does anyone know what filament colors best match the OEM Lightning colors? I have antimatter blue for a starter...

 

[queuewho]

No, not yet. I run a small business printing parts so I'm not usually open with the STLs. Let me see if I can brand them in a way to keep people from stealing the file and printing them off for sale.

Can we see a picture of your print farm? Would be neat to see.

 

[sceroguitars]

I designed a Wireless Charging pad, for lower trim Lightning's, that don't have one!

Wireless Charging Pad

 

[VAL.ABAPO]

Water Bottle organizer.

Water bottles tumble whenever there's less than 3 bottle's in place.

so I thought of having something to prevent this and keeping the space.

 

[Crash McBang]

nice, I had to pull over today and rearrange my bottles to reduce noise.

Is there an STL file?

 

[branden]

Water Bottle organizer.

Water bottles tumble whenever there's less than 3 bottle's in place.

so I thought of having something to prevent this and keeping the space.

I'd love the STL for this

 

[bordner42]

I posted this one a while back in another thread, but here is my key fob card to get "PAAK" functionality for those of us without the feature. I did a full write up on the Thingiverse link, so if you want to follow my process, you should be able to procure everything from the links there. Fairly easy print (though you can tell from the images I needed to clean my bed better between prints), however, it does require some soldering.

Ford Card Fob by Dpetricca - Thingiverse

How's this holding up/working out for you? Do you have passive entry or do you just use your phone to unlock/lock it?

 

[NPalumbo89]

Water Bottle organizer.

Water bottles tumble whenever there's less than 3 bottle's in place.

so I thought of having something to prevent this and keeping the space.

This is awesome!! great work. Would you be open to sharing the stl?

 

[Crash McBang]

Got tired of having bottles rattle around, and no STL was forthcoming from VAL, so I made a modular bottle holder. Attached is the STL and some pictures. I used PLA to print and a bit of a rubbery adhesive (E6000) to stick the modules together. They wedge into the door pocket and prevent the bottles from flopping around during high-G maneuvers (e.g. making a left turn

 

[Plug-N-Play]

My feeble attempt at a custom hitch cover. This is a PLA prototype. Once I finish making tweaks I’ll reprint in ABS.

 

[AMG]

Someone needs to do a high resolution 3D scan of the rear center console cup holder unit (remove it from the console), then simply modify the cups to add the pressure parts like the front cup holders (and the previous ICE F-150 had these), with the rubber band supplying pressure.

Like this OEM method which is hard to come by.

Sponsored