ECU module programming guide using FDRS

[JEB]

I know I'm not contributing anything useful but my UCDS adapted flashed it just fine.

I disagree. That’s pretty useful. The FD CAN is relatively new and this helps confirm that not every programmer can work with it.

Sponsored

 

[tonesto7]

Sorry about that! No offense intended. I was actually suspecting that your widget might have been even more sensitive. The aberrations in these three nodes are awfully consistent. They don’t look like corruptions.

Lol... I thought my emoji was conveying my sarcasm. I'm not offended in the slightest.

Seriously though I've been working on some ways to present all of this stuff outside the widget in a browser. I have more work to do still but eventually, I will have a portal for everyone to use for viewing all sorts of data

 

[tonesto7]

I disagree. That’s pretty useful. The FD CAN is relatively new and this helps confirm that not every programmer can work with it.

It sucks that you can't buy the UCDS adapters right now. They were only $99.
The V5 is supposed to be released soon but who knows with all the stuff going on between Ukraine and Russia.

 

[Fordphanatic]

WARNING - FOR FOLKS USING THE VCX NANO DEVICE

We suspect, the VCX Nano does not perform well with certain devices on FD CAN bus. We are still investigating this but in the mean time please refrain from flashing the CCM module as there is a high chance of bricking it.

If you bricked your module (showing up as Purple in FDRS) you can fix it by PMI-ing the module in FDRS using the Mongoose-Plus cable, or any of the official Fords adapter (VCMII or VCM3).

Folks using the Mongoose-Plus device should be good to go

How can you tell if you bricked the ccm module without running network scan with the Nano

 

[JEB]

It sucks that you can't buy the UCDS adapters right now. They were only $99.
The V5 is supposed to be released soon but who knows with all the stuff going on between Ukraine and Russia.

I have heard really good things about that adapter. For the money it was an absolute steal.

As for the work you’re doing with the widget and otherwise, I have found it invaluable. To put it mildly.

 

[iceman77]

Nice! Thanks for having a look., much appreciated.

JFYI - I have just checked another user AB data and his data shows the same "anomalies" for IPMA like yours

 

[Thekameleon]

I know Bob_Mac is helping me with this, but I am also getting this error when trying to update the GWM Module A. Just curious if anyone has seen this or knows anything about it.

 

[JEB]

How can you tell if you bricked the ccm module without running network scan with the Nano

Is cruise control working?

 

[Bob_Mac]

How can you tell if you bricked the ccm module without running network scan with the Nano

Under Toolbox, what color is the CCM module?

 

[Fordphanatic]

Is cruise control working?

Not sure Ipma is updating now. I did the cmr without an issue. The ccm failed immediately. The pscm updated no issue and now im on impa and its taking forever.

 

[iceman77]

How can you tell if you bricked the ccm module without running network scan with the Nano

It would turn purple right after the module SW update fail! Also, you can run a "Self-test" on it, that should show the same

 

[Bob_Mac]

I know Bob_Mac is helping me with this, but I am also getting this error when trying to update the GWM Module A. Just curious if anyone has seen this or knows anything about it.

Still trying to think this one through, you did 2 consecutive PMI's on the GWM last night. In the Toolbox what color is the GWM Module?

 

[Bob_Mac]

Not sure Ipma is updating now. I did the cmr without an issue. The ccm failed immediately. The pscm updated no issue and now im on impa and its taking forever.

Pic of your screen? IPMA is a very, very lengthy update.

 

[Fordphanatic]

Pic of your screen? IPMA is a very, very lengthy update.

 

[Bob_Mac]

Oh.... that moves very slow. Pour yourself a bourbon and sit back... you're still in the early stages. Patience grasshopper.

Sponsored