✅ 7/11/22 Lightning Build Week Group

[merek]

See my post in this thread, I think the part is defective, I would verify yours on delivery.

https://www.f150lightningforum.com/forum/threads/wheel-well-rubbing.11737/

Sponsored

 

[Yellow Buddy]

See my post in this thread, I think the part is defective, I would verify yours on delivery.

https://www.f150lightningforum.com/forum/threads/wheel-well-rubbing.11737/

I think I see at least one missing push river. Your Bumper also seems to be point down?

Can you take a picture further away too?

 

[merek]

I think I see at least one missing push river. Your Bumper also seems to be point down?

Can you take a picture further away too?

The bumper isn't pointing down, it's styled and molded like that. I can try to take some more pictures. I didn't see any holes or anything that looks missing. I think it's molded wrong.

 

[merek]

Some more pictures

 

[merek]

This is the drivers side, which looks correct.

 

[Yellow Buddy]

The bumper isn't pointing down, it's styled and molded like that. I can try to take some more pictures. I didn't see any holes or anything that looks missing. I think it's molded wrong.

The front passenger one side still looks like it has a larger gap to me. It looks pushed out further away from center and lower towards the back. Most of the ones I have seen have an even gap. I’m not sure if it’s just the angle

I see a screw where I thought there was a hole. So scratch the rivet.

 

[Yellow Buddy]

They Know, just play with him and get his all geared up for nothing, They're probably watching this.

For me, definitely. 3 cars arrived at another rail depot and were loaded right away. Same day while I sit.

 

[Yellow Buddy]

Now I am just waiting for a truck.

Where’s your driver buddy? Time to make a call!

 

[Ford Senior Master]

Where’s your driver buddy? Time to make a call!

Yeah about that... he brought three vehicles one day last week and didn't leave a BOL. My dealer made a big fuss and emailed everybody. So he probably won't be back.

 

[janikir]

Is that basically the dampener? Have a link?

Yep!
The one I got is as follows,
https://www.amazon.com/dp/B08NJ7RJVF?ref=ppx_yo2ov_dt_b_product_details&th=1
...but there are many others you can find for less and should do the same, I suppose. I chose that one because of gray color option (see pic. installed). I added also one pic of a truck from a driveway to prove it is no more 'in the wild' but 'in captivity'.

 

[Yellow Buddy]

I was going through my daily F150L videos and saw this:


At 2:50, I spit my milk out through my nose as I thought to myself. Wait until this fool gets the price of this piece of plastic.

@Commercial Sales Ford how much is this platinum lined piece? @Ford Senior Master, @bobrosco we should play the price is right until he responds.

I’ll start the bidding at $150.

 

[Ford Senior Master]

I was going through my daily F150L videos and saw this:


At 2:50, I spit my milk out through my nose as I thought to myself. Wait until this fool gets the price of this piece of plastic.

@Commercial Sales Ford how much is this platinum lined piece? @Ford Senior Master, @bobrosco we should play the price is right until he responds.

I’ll start the bidding at $150.

This dude has no clue how warranty works or he has been subjected to one sorry service dept. I think that part will be around $50 but it should be covered the same as the warpage on the running board.

 

[Yellow Buddy]

This dude has no clue how warranty works or he has been subjected to one sorry service dept. I think that part will be around $50 but it should be covered the same as the warpage on the running board.

And the rattles. Basically anything that is….bumper to bumper. He’s going to make it worse for himself by pulling it apart himself. But that’s not the point. I’m waiting to hear that the part is actually $50000 or some other ridiculous number

 

[bobrosco]

I was going through my daily F150L videos and saw this:


At 2:50, I spit my milk out through my nose as I thought to myself. Wait until this fool gets the price of this piece of plastic.

@Commercial Sales Ford how much is this platinum lined piece? @Ford Senior Master, @bobrosco we should play the price is right until he responds.

I’ll start the bidding at $150.

$84

 

[jazzmanmonty]

I was going through my daily F150L videos and saw this:


At 2:50, I spit my milk out through my nose as I thought to myself. Wait until this fool gets the price of this piece of plastic.

@Commercial Sales Ford how much is this platinum lined piece? @Ford Senior Master, @bobrosco we should play the price is right until he responds.

I’ll start the bidding at $150.

Why are all the annoying YouTubers getting their trucks so quickly?

Sponsored