glad you can get past that. Mine goes to 7 and 50% and then says restart needed and i do that and nothing else happensI thought I was all up to date and good for a while and decided just out of curiosity to run my VIN.
An unexpected GWM update sitting there all alone.
Turns out it's 14 files via USB technique.
Don't know what it's for, but why not?
No change in baud rate. This was for the IPC update from a few weeks ago. If there is a new one for Bluecruise, that is not the one that I was able to fix.
What sync and rev have you been at out of curiosity?I thought I was all up to date and good for a while and decided just out of curiosity to run my VIN.
An unexpected GWM update sitting there all alone.
Turns out it's 14 files via USB technique.
Don't know what it's for, but why not?
does yours show all 14 files transferred before it ask for restart? Mine goes to 7 our 50% the disipers and says restart needed.I hate hearing that nicholsbradley.
My truck originally, back in January was cantankerous like that at times. But it finally developed a rhythm and now it just sucks up the updates like a good puppy.
As soon as those 14 files copied, I got the restart truck command. A couple of minutes later:
Then the file validation in FDRS and configuration of module. Smoothly.
But then a fresh rescan and an APIM update pops up!
I swear this truck gets more updates than my Windows or Android devices do.
I've been at:
I believe you are correct that it was 0/14, then 7/14, then finished.
That also could be the case. Microsoft defender has been tripping lately too but never in relation to FDRS. Would a factory reset and clean install of windows help?Your last screenshot leads me to believe you may have bad RAM, some sort of corruption on your storage drive, or a virus.
1. If you are running Windows 10, open "virus & threat protection", click Scan options, then select Microsoft Defender Offline scan.
2. If you want to test your RAM, try Memtest86+. Download to a USB, then boot to the USB and run a few tests on your RAM.
http://www.memtest.org/#downiso
3. You may also try a checkdisk on your drive by running "chkdsk C: /R /F" from command prompt
wow then you just kill truck open doors restart and works right off the bat?
Yes. But I promise it wasn't always like that.
You’re even with me now.Oops. I guess my sweet talk is still working.
Dang that was fast for an 800magabyte update
You can expect a continuous stream of updates, including APIM updates.I’m only getting this Sync version after my APMI update. Should I expect another APMI update to appear for a later version?
