ECU module programming guide using FDRS

[Mike G]

Yeah, I don't know why the process of separately running the IPMA Config afterward worked for me and a few others months ago, but is seemingly not working for anybody who tries it now. And it seems to be mostly with '23 models. At least that's my impression.

Sponsored

 

[Warp Asylum]

Yeah, I don't know why the process of separately running the IPMA Config afterward worked for me and a few others months ago, but is seemingly not working for anybody who tries it now. And it seems to be mostly with '23 models. At least that's my impression.

PSCM didn't clear for my 22 after I did it last weekend.

 

[Mike G]

PSCM didn't clear for my 22 after I did it last weekend.

No idea why it worked for a few of us early on, but not anymore.

I still have the ACM and RFA updates in the list, but one or the other of those have cleared for other people that did them after I did. ?‍

 

[Scorpio3d]

No idea why it worked for a few of us early on, but not anymore.

I still have the ACM and RFA updates in the list, but one or the other of those have cleared for other people that did them after I did. ?‍

My RFA cleared after I did the BCM update. I just can’t remember if it was the BCM that caused it clear or if I ran it again afterwards it was a couple months ago. I should document this stuff better.?‍?

Edit: I just realized I can probably look through my notes/logs in FDRS I will try to do that when I have time!

 

[Pitbull2o08]

Did you guys need to have an NASTF registry log in to update the BCM?

 

[rugedraw]

Did you guys need to have an NASTF registry log in to update the BCM?

Yea, you can't do the BCM. Just move along to the next one.

 

[Pitbull2o08]

Yea, you can't do the BCM. Just move along to the next one.

Thanks. How do I do the IPMA? It doesn’t show up on my SW list.

 

[rugedraw]

Thanks. How do I do the IPMA? It doesn’t show up on my SW list.

The only reason the IPMA would not be showing a pending update is if it was already updated. Looking back on our convos via PM, the dealer updated your IPMA/PSCM on 12/20. It is already on the BBC version which is the latest for BC 1.4.

 

[Pitbull2o08]

The only reason the IPMA would not be showing a pending update is if it was already updated. Looking back on our convos via PM, the dealer updated your IPMA/PSCM on 12/20. It is already on the BBC version which is the latest for BC 1.4.

ahh that's right. so if i want to enable 1.4, i'll need Forscan?

 

[Mike G]

Did you guys need to have an NASTF registry log in to update the BCM?

Or a dealer tech can do it...they inherit permissions from the dealer's admin system.

 

[Pitbull2o08]

So ive updated all modules i could. The only thing left that i downloaded but can't clear are...

PSCM
BCM
ACM
RFA

i tried to rum the ACM and RFA multiple times without it doing anything.

 

[rugedraw]

ahh that's right. so if i want to enable 1.4, i'll need Forscan?

Correct. Message me when you're ready and I'll send you the info.

So ive updated all modules i could. The only thing left that i downloaded but can't clear are...

PSCM
BCM
ACM
RFA

i tried to rum the ACM and RFA multiple times without it doing anything.

ACM and PSCM are known to not come off the list. The RFA can be a PITA to get it to update from my understanding. Not sure if there is a trick for that one to get it to go through or if it also just does not come off the list. I will have to defer to @Mike G or someone that has more experience with the EV's on that one.

 

[Mike G]

Correct. Message me when you're ready and I'll send you the info.



ACM and PSCM are known to not come off the list. The RFA can be a PITA to get it to update from my understanding. Not sure if there is a trick for that one to get it to go through or if it also just does not come off the list. I will have to defer to @Mike G or someone that has more experience with the EV's on that one.

My RFA and ACM are still in the list from months ago.

There are some folks who have managed to get rid of one or the other, but not both. Don't really know how that happened.

 

[rugedraw]

My RFA and ACM are still in the list from months ago.

There are some folks who have managed to get rid of one or the other, but not both. Don't really know how that happened.

So basically, do it once and ignore it like the ACM.

 

[Pitbull2o08]

i got 1.4. But i'm missing 2 TPMS values.

Sponsored