F150 Lightning FORScan thread - Version 2

[BrandonSRT]

I was just thinking about this the other night...drop the two setups into chatGPT and let it find it

I've tried that many times with different GPT levels and Grok and Gemini. They all hallucinate and make shit up. I'd be willing to try it again if I can get someone's as built directly off of their truck, but I am starting to have a feeling the APIM or DSP modules are different from Platinum to Lariat.

Propulsion sound settings are enabled in the APIM here:

Many have tried that and it doesn't work, I have the toggle on my screen but still no sound. If I hit the toggle, it turns the toggle on for two seconds, thinks about it, and then fails and turns itself off.

Sponsored

 

[rugedraw]

I've tried that many times with different GPT levels and Grok and Gemini. They all hallucinate and make shit up. I'd be willing to try it again if I can get someone's as built directly off of their truck, but I am starting to have a feeling the APIM or DSP modules are different from Platinum to Lariat.


Many have tried that and it doesn't work, I have the toggle on my screen but still no sound. If I hit the toggle, it turns the toggle on for two seconds, thinks about it, and then fails and turns itself off.

This is sounding a bit familiar now. I remember seeing this at some point, too. I think there's a hardware element to this. Some physical component that the higher trims have........I can't remember the exact details. I'm sure someone will chime in on it.

 

[bmwhitetx]

Many have tried that and it doesn't work, I have the toggle on my screen but still no sound. If I hit the toggle, it turns the toggle on for two seconds, thinks about it, and then fails and turns itself off.

Historically, an APIM-enabled toggle that won’t stay on was due to missing hardware or older firmware. PPOB with truck off and IIRC BC Lane Change Assist did this until other modules were updated.

This is sounding a bit familiar now. I remember seeing this at some point, too. I think there's a hardware element to this. Some physical component that the higher trims have........I can't remember the exact details. I'm sure someone will chime in on it.

Yep, has been tried before. Needs hardware. Not a software only mod. Jesse explains here. https://www.f150lightningforum.com/forum/threads/propulsion-sound.22894/post-530473

 

[Paulb55]

Historically, an APIM-enabled toggle that won’t stay on was due to missing hardware or older firmware. PPOB with truck off and IIRC BC Lane Change Assist did this until other modules were updated.

Yep, has been tried before. Needs hardware. Not a software only mod. Jesse explains here. https://www.f150lightningforum.com/forum/threads/propulsion-sound.22894/post-530473

Thanks. Saved me time today.

Sponsored