F150 Lightning FORscan thread

[bewbie]

Is there a way to make all of the windows one-click auto up down?

Sponsored

 

[BennyTheBeaver]

Curious if you or @BennyTheBeaver were able to get the lighter to cooperate.

I have a lightbar, I haven't even tried to tackle it yet for a few reasons.

1. I'm backed up on projects due to poor weather and needing to work on the truck outside

2. Family/work has come first

3. The Pro grill's black lightbar piece is actually connected to the grill. I have to dremel off that black insert in order to leave a space for the lightbar. I don't want to do that until I know the lightbar mod works.

If I don't get to it in the next 2 months I'll probably just sell the lightbar on eBay. I originally didn't like the look of the black strip on the Pro, it had slowly started to grow on me.


For anyone looking to do this project, another idea I had (aside from Forscan) has possibly splitting the wires from the 2 DRL's into the lightbar.

 

[GDN]

Is there a way to make all of the windows one-click auto up down?

There is not. The back doors lack the switches - they need the dual click to do it from within the truck.

It could be done from a remote or touchscreen if they chose because you can tell the computer to do anything you want.

 

[Blochead21]

Does anyone know a way of enabling zone lighting through FORscan? Looks like the 2023 Pro has this already enabled but my 22 is missing it.

Sorry, i've been busy and without my truck some days so I haven't been able to respond. I can enable it in the as built sections, but it doesnt turn on once shown in the truck. If someone can send me a vin with a base Pro or XLT with zone lighting I can look through the as built codes better to compare.

 

[biers]

I just purchased this kit from infotainment.com: https://www.infotainment.com/collec...in-sense-wiper-upgrade?variant=40409038848036

They told me it would work on the lightning, I just got it in the mail and will keep you guys posted on how it goes!

Do you happen to have the ford part numbers for the sensor and the wire harness they include?

 

[Photon]

Got glare free working tonight. Thanks all for helping with the forscan and testing!

Used the values from OP post, cycle each time I write to the module and double check each module before moving into next. I did have to turn my lights back onto automatic after writing all the code.

Whole process was pretty easy, but I’m also not a forscan newbie, had a 2018 Raptor that I changed quite a bit.

 

[phenem]

Do you happen to have the ford part numbers for the sensor and the wire harness they include?

The rain sensor is the easy part. The harness is custom made by them and runs from the sensor to the clock spring / SCCM, so it’s not a factory part or harness and without some knowledge of the connector types would be hard to reproduce.

 

[vsansal]

Sorry, i've been busy and without my truck some days so I haven't been able to respond. I can enable it in the as built sections, but it doesnt turn on once shown in the truck. If someone can send me a vin with a base Pro or XLT with zone lighting I can look through the as built codes better to compare.

Thank you. I was able to enable the menu option but mine is also not working either.

 

[Jeffgtx]

update on adding rain sensing wipers to Lariat SR.

I have only added the sensor on the windshield and changed the 4 lines mentioned earlier in this thread.

I did NOT change stalks or add any wiring.

Today it rained and I left the stalk in the off position which is the same as the A position in the new stalk and it never wiped the window. however, when i moved it up one spot to the single drip icon, it started wiping and then once the rain stopped, the wipers stopped.

so you do not need to change the stalk to get it to work. yay.

 

[biers]

Correct I don't see it, attached what i have and circled the factory connector

Decided to take a second look and pulled the whole cover off. My 22 Pro does have the wire there, it was just tucked up there nicely. $40 auto wipers, here we come!

 

[Blochead21]

update on adding rain sensing wipers to Lariat SR.

I have only added the sensor on the windshield and changed the 4 lines mentioned earlier in this thread.

I did NOT change stalks or add any wiring.

Today it rained and I left the stalk in the off position which is the same as the A position in the new stalk and it never wiped the window. however, when i moved it up one spot to the single drip icon, it started wiping and then once the rain stopped, the wipers stopped.

so you do not need to change the stalk to get it to work. yay.

Is this with or without the BCM line being modified?

Also can you confirm the rain sensor PN? And how that cover comes off?

 

[Jeffgtx]

its with all four changes i mention in my earlier post. so if one of those is BCM, then yes.
Add rain sensor:
7D0-09-04 x3xx-xxxx-xx—
726-39-02. xxxx-xxxx-01—
720-02-02. xx8x-xx—
724-02-01 xxxx-xC4x- —

part was
LU5Z-17D547-B
i cannot remember if it got substituted after my order for a newer part.

as i recall you just pull the cover down and it eventually unclips.

 

[Blochead21]

its with all four changes i mention in my earlier post. so if one of those is BCM, then yes.
Add rain sensor:
7D0-09-04 x3xx-xxxx-xx—
726-39-02. xxxx-xxxx-01—
720-02-02. xx8x-xx—
724-02-01 xxxx-xC4x- —

part was
LU5Z-17D547-B
i cannot remember if it got substituted after my order for a newer part.

as i recall you just pull the cover down and it eventually unclips.

You guys are talking about this small clip with the green/blue/black wires for the rain sensor correct?

 

[Jeffgtx]

believe so. there is a three prong wiring connector up there sitting in a clip connected to nothing.

 

[Blochead21]

Sweet. Just bought the sensor and will install once it gets here.

Sponsored