FordPass PPO menu this is new right?

[Rtashiro]

I have a 23 lariat and just upgraded to the iOS public beta 2 went back into go and no change for me

Sponsored

 

[SFsparkie]

I would not blindly add 2.
For 7DO-10-04 xxx* xxxx xx-- See this post and enable AECVP keeping your other options the same.
For example if 0,4,8,C then add 2
If 2,6,A,E then it is already enabled and don't add 2. If you do you then you'd end up disabling it and toggling RF.

Got it- I see the spread sheet for 7DO-10-04

 

[dmd3home]

This is fantastic!!! Well, it's a start anyway. I was soooo disappointed after buying my truck that to use PPO I had to leave the truck ON the whole time (often overnight) and had to turn OFF everything possible trying to minimize wasted power. What an absolutely dumb design!!! I expected them to be better than this. I guess this was finally fixed in 2025, but what about us faithful early adopters??? Why are we left out? Now it appears (I don't have it yet) that there are some improvements.....if only seeing what's happening with PPO. Hopefully this progresses to actually being able to CONTROL PPO and run it without having to keep the truck running the whole time! Please Please Please!!

 

[flyin525]

Got it- I see the spread sheet for 7DO-10-04

Any luck? I saw the public beta is available today as well.

 

[SFsparkie]

Thank. Requested update. Have not yet done Forscan for advanced charging.

 

[Andrewbens]

Thank. Requested update. Have not yet done Forscan for advanced charging.

What’s this forscan for advanced charging?

 

[The Unc]

This is fantastic!!! Well, it's a start anyway. I was soooo disappointed after buying my truck that to use PPO I had to leave the truck ON the whole time (often overnight) and had to turn OFF everything possible trying to minimize wasted power. What an absolutely dumb design!!! I expected them to be better than this. I guess this was finally fixed in 2025, but what about us faithful early adopters??? Why are we left out? Now it appears (I don't have it yet) that there are some improvements.....if only seeing what's happening with PPO. Hopefully this progresses to actually being able to CONTROL PPO and run it without having to keep the truck running the whole time! Please Please Please!!

^^ This ^^

 

[SFsparkie]

Any luck? I saw the public beta is available today as well.

Just finished updated to iOS 26.1 (23B5059e). FP 5.28.0 does not show PPO. Have not used Forscan for Advanced Charging yet.

 

[flyin525]

Just finished updated to iOS 26.1 (23B5059e). FP 5.28.0 does not show PPO

I’m really sorry it didnt show up for you. I can’t think of anything else I’ve done that would have made it appear.

 

[SFsparkie]

What’s this forscan for advanced charging?

I know next to nothing about it and have not tried the Forscan. There is a link earlier in this post inferring it may have something to do with FP having PPO.

 

[flyin525]

What’s this forscan for advanced charging?

It’s not fully functional yet for earlier trucks but it alllows you to set the amperage and global settings for charging. For example you can set DC fast charging to stop at 80% or any unknown AC chargers to stop charging at whatever threshold you want. It also shows your current t charge rate and Amperage. In the center screen while charging.

 

[Andrewbens]

It’s not fully functional yet for earlier trucks but it alllows you to set the amperage and global settings for charging. For example you can set DC fast charging to stop at 80% or any unknown AC chargers to stop charging at whatever threshold you want. It allows your current t charge rate and Amperage. In the center screen while charging.

Wow, I think every car has this feature but Ford. This would be awesome to have

 

[christooma]

I’m really sorry it didnt show up for you. I can’t think of anything else I’ve done that would have made it appear.

It's a very common practice in software development to enable or disable features for a subset of users during testing using feature flags - which can be flipped server side. In these instances, the user doesn't do anything to trigger.

 

[Maquis]

It's a very common practice in software development to enable or disable features for a subset of users during testing using feature flags - which can be flipped server side. In these instances, the user doesn't do anything to trigger.

That’s very likely the case here. Ford have done this previously when rolling out new FP functionality.

 

[SFsparkie]

I’m really sorry it didnt show up for you. I can’t think of anything else I’ve done that would have made it appear.

No problem—appreciate your contribution to the content. I will try to get Advanced Charging with Forscan and see if it affects FP.

Sponsored