FordPass PPO menu this is new right?

[Maineiac12]

Fair enough. My theory still stands. I think this functionality is only going to Lariat and Platinum owners.

I would be pretty pissed if they gatekeep this functionality behind trim level when Pro, XLT, Flash owners paid extra for 9.6 kw pro power when they bought the truck and we already had that app feature previously.

Sponsored

 

[TaxmanHog]

I wouldnt call them controls, when I turned the truck on, you can only monitor the usage.

I'm on Android so maybe it's phone OS dependent?

Funny thing when I started the truck, then looked at the PPOB app, it showed the system in an OFF status, which surprised me, for years this has always defaulted to ON with the cabin outlets being available. Funny that many members over the years have indicated they would like it to remain default OFF until a need arises, maybe a recent OTA brought us this easter egg?

I manually turned the system on, to show only cabin outlets available.

Then I turned on the Frunk & Bed outlets, showing status' as expected.

My 5.28.0 version 9/8 installed 9/18, does not present a view of Productivity Functions on the Vehicle tab.

 

[21st Century Truck]

I don't have that on my Android. No longer have my work forced on me iPhone.

Congrats! ...on both matters

 

[Rtashiro]

I have a ‘23 lariat and I do not have this in the app. But would sure like to have it. I just had a power outage yesterday and would have liked to monitor when running the house from the generator interlock.

 

[SFsparkie]

Same. 23 Lariat, ios26.1, Ford Pass 5.28, PAAK, and NO productivity function. No opportunity to update iOS or Ford Pass

 

[flyin525]

Same. 23 Lariat, ios26.1, Ford Pass 5.28, PAAK, and NO productivity function. No opportunity to update iOS or Ford Pass

As long as you updated 26.1 to beta 2 that became availible yesterday, that should be it.

The only thing I can think that may have enabled it is that I made the enhanced charge settings change in Forscan..

https://www.f150lightningforum.com/forum/threads/add-charge-enhanced-charge-settings.28373/

 

[SFsparkie]

I don’t have beta 2. It does not appear as available on my phone yet

 

[flyin525]

I don’t have beta 2. It does not appear as available on my phone yet

You must be on the public beta then. I have the developer Beta, which means I’m just a couple days ahead of you.

 

[SFsparkie]

Thanks for explaining the Betas. I will try the updated charging with Forscan

 

[SFsparkie]

For your 23. What Forscan changes did you use successfully. Is it 6 or E or just two up on 7DO-10-04 xxx* xxxx xx--

 

[flyin525]

For your 23. What Forscan changes did you use successfully. Is it 6 or E or just two up on 7DO-10-04 xxx* xxxx xx--

I just went 2 up from what was there. I dont recall what it was - I did it a month or so ago.

 

[ClevelandBeemer]

I would be pretty pissed if they gatekeep this functionality behind trim level when Pro, XLT, Flash owners paid extra for 9.6 kw pro power when they bought the truck and we already had that app feature previously.

I hope that I’m wrong….

 

[bmwhitetx]

For your 23. What Forscan changes did you use successfully. Is it 6 or E or just two up on 7DO-10-04 xxx* xxxx xx--

I would not blindly add 2.
For 7DO-10-04 xxx* xxxx xx-- See this post and enable AECVP keeping your other options the same.
For example if 0,4,8,C then add 2
If 2,6,A,E then it is already enabled and don't add 2. If you do you then you'd end up disabling it and toggling RF.

 

[ClevelandBeemer]

I wouldnt call them controls, when I turned the truck on, you can only monitor the usage. If you had FP 4.xx, it’s similar to that.

I just updated to iOS 26.1 Bata 2 as well as made sure my FordPass is V18.28.0. If the new info is because of iOS then a Lariat or Platinum with PAAK is needed have the new info display.

Needless to say this is very disappointing….

 

[Rtashiro]

I have a 23 lariat and just upgraded to the iOS public beta 2 went back into go and no change for me

Sponsored