boandabby
New member
- Thread starter
- #1
I recently installed two inverters and two LFP batteries in the garage for a home power backup system, and I hope to save on utility costs by using batteries (time of use feature). In 2024, we lost power for 4-5 days in the humid summer in Texas.
Please see the attached picture for my setup. The All-in-one inverter can charge the batteries (at night) and also convert battery power to AC output to power my house.
The battery capacity is about 32 kwh in total. I am afraid that it will not be enough if we lose power for a few days. So I am wondering whether I can charge the two batteries using my f150 lightning (~130 kwh).
The 48 v battery charger is on sale at Amazon: Amazon.com: ECO-WORTHY Upgraded (Version 2) 48V 60A Lithium Battery Charger, Adjustable Voltage & Current, CAN BMS Communication, Generator Plug, Smart Fast Charger for Server Rack LiFePO4 Battery: Patio, Lawn & Garden
I am thinking of adding battery cables between this charger and the bus bars, which are connected to the inverters and batteries. I hear the bonded neutral issues, f150 lightning cannot be connected to my load panel directly. I hope this will provide a feasible solution. Are there safety concerns that I should pay attention to?
Please see the attached picture for my setup. The All-in-one inverter can charge the batteries (at night) and also convert battery power to AC output to power my house.
The battery capacity is about 32 kwh in total. I am afraid that it will not be enough if we lose power for a few days. So I am wondering whether I can charge the two batteries using my f150 lightning (~130 kwh).
The 48 v battery charger is on sale at Amazon: Amazon.com: ECO-WORTHY Upgraded (Version 2) 48V 60A Lithium Battery Charger, Adjustable Voltage & Current, CAN BMS Communication, Generator Plug, Smart Fast Charger for Server Rack LiFePO4 Battery: Patio, Lawn & Garden
I am thinking of adding battery cables between this charger and the bus bars, which are connected to the inverters and batteries. I hear the bonded neutral issues, f150 lightning cannot be connected to my load panel directly. I hope this will provide a feasible solution. Are there safety concerns that I should pay attention to?
Sponsored