New BlueCruise Version 1.4 - Rollout IPMA-24.204.10.9

[LazyLightningATX]

Just a little more than 13 months after I used FDRS to make the BlueCruise updates myself last summer, I can now say I officially have been updated to 1.4! thanks Ford! knocking it outta the park!

Sponsored

 

[Webbo85]

Finally got the update! Might have to take the highway tomorrow rather than the back roads up to the mountains just to try it out. '23 Lariat ER

 

[LightningStrike]

Blue Cruise 1.4 OTA In progress now

Just started the Blue Cruie 1.4 OTA Update...said it would take up to 83 minutes....a bit nervous that it will complete successfully and not brick the truck

 

[Caliber357x]

I thought this was interesting - I was at about 83% when I plugged in yesterday, before the BC 1.4 update started. Did that update really use 220kWh of energy? If so…that’s a lot of juice for the angry bumblebees.

 

[CD4TNF]

It's worth it. Enjoy the beauty of BC 1.4. I'm seeing a joy test ride in your future.

 

[Caliber357x]

Just to answer my own question, I unplugged the truck so the FCSP could log the charge event - no, it didn’t use that much energy - the charge is about 1kWh higher than normal for my drive yesterday.

 

[Scorpio3d]

I thought this was interesting - I was at about 83% when I plugged in yesterday, before the BC 1.4 update started. Did that update really use 220kWh of energy? If so…that’s a lot of juice for the angry bumblebees.

No, it did not use 220 kWh there are many reports of strange data in Ford pass, myself included! I said I must’ve gotten the battery expansion OTA update!

 

[Scorpio3d]

Just to answer my own question, I unplugged the truck so the FCSP could log the charge event - no, it didn’t use that much energy - the charge is about 1kWh higher than normal for my drive yesterday.

LOL
I guess you posted this during the time I was replying

 

[GDN]

Great news on the rollout. It's as though someone, might have had a crystal ball.
Now about that Pro Power without starting the truck for '22's and '23's @Gimme_my_MME !

 

[PACSMAN]

I received the 1.4 update as well last night.

 

[PJnc284]

I just want my percentage and amperage sliders from the 25s to work on my 23. On the bright side, it does show the charging speed on the big screen.

 

[RocketGhost]

Just went and hooked up my 12v charger to make sure it's got enough charge to take an update. Just in case I'm on the list for this rollout.

 

[TaxmanHog]

Adjusted thread title to eliminate "March 2025"

 

[LightningStrike]

Blue Cruise 1.4 OTA In progress now

Just started the Blue Cruie 1.4 OTA Update...said it would take up to 83 minutes....a bit nervous that it will complete successfully and not brick the truck

Update - went through without a hitch…you could hear the charger electronics humming for about 35-40 min as it started…maybe to ensure the 12v had enough juice to complete the download and start the update. It did lose 1% of the traction battery during the update

 

[MrH42]

Got the update last night. Drove to work this morning which is probably 30 miles of Blue Cruise highway.

Seems smoother? Less bouncing back and forth.

I didn't have any automatic lane change capability though. I looked in the options and didn't see the ability to turn that on at all. The update said this control will added later???

Sponsored