Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

[richguy82]

Has anyone come up with a clean solution with a MagSafe mount for iPhone? Was hoping to find a way to run the power into the glovebox instead of the charger by the screen. Just trying to do a little planning before I pull the trigger. There is another person selling a conversion mount on Etsy now but with a cup holder instead.

Sponsored

 

[The Weatherman]

What is yours made out of? I chose ABS for mine. I’ve not gotten it yet to see how it really looks.

Yes, ABS.

 

[richguy82]

Has anyone come up with a clean solution with a MagSafe mount for iPhone? Was hoping to find a way to run the power into the glovebox instead of the charger by the screen. Just trying to do a little planning before I pull the trigger. There is another person selling a conversion mount on Etsy now but with a cup holder instead.

Not glovebox. Console

 

[digitaldad]

Has anyone come up with a clean solution with a MagSafe mount for iPhone? Was hoping to find a way to run the power into the glovebox instead of the charger by the screen. Just trying to do a little planning before I pull the trigger. There is another person selling a conversion mount on Etsy now but with a cup holder instead.

This was my attempt at a magsafe holder-mount but not magsafe charging.

 

[MrFahrenheit]

Has anyone come up with a clean solution with a MagSafe mount for iPhone? Was hoping to find a way to run the power into the glovebox instead of the charger by the screen. Just trying to do a little planning before I pull the trigger. There is another person selling a conversion mount on Etsy now but with a cup holder instead.

I bought this one. I have the 12" screen and had the coin holder that this took the place of. Works great and the location is really nice: https://www.etsy.com/listing/1854601011/change-charger-iphoneandroid-magsafe

 

[El Duderino]

I bought this one. I have the 12" screen and had the coin holder that this took the place of. Works great and the location is really nice: https://www.etsy.com/listing/1854601011/change-charger-iphoneandroid-magsafe

Thanks for posting this, new to me. Looks like a great solution. And reasonable price considering other ETSY sellers are asking $30 for just magnetic phone mount without charger for this coin holder spot.

 

[richguy82]

I bought this one. I have the 12" screen and had the coin holder that this took the place of. Works great and the location is really nice: https://www.etsy.com/listing/1854601011/change-charger-iphoneandroid-magsafe

That is super clean looking! I have the brake controller and 15 inch screen unfortunately.

 

[SnakeJazzismyjam]

**** SOLD *** FYI - If anyone needs a rotary shifter holder fast, I have one available. Feel free to reach out. I ordered two and I have one I can send to you asap.

I’ll even throw in snacks. I’m fat and don’t need them anyway.

 

[El Duderino]

FYI - If anyone needs a rotary shifter holder fast, I have one available. Feel free to reach out. I ordered two and I have one I can send to you asap.

I’ll even throw in snacks. I’m fat and don’t need them anyway.

What vendor or person did you buy it from?

 

[SnakeJazzismyjam]

What vendor or person did you buy it from?

the gentlemen on Etsy manionmakes.

 

[asianman35]

I also happen to have an extra one that I printed. I had a few people on the forum buy them from me and printed out 1 too many. PM me if interested.

 

[SnakeJazzismyjam]

I also happen to have an extra one that I printed. I had a few people on the forum buy them from me and printed out 1 too many. PM me if interested.

Hey! Whoa! Go find another thread to sell your stuff on . Good print though.

 

[rio]

For those of you with 12" displays having done this mod... Does the video below show the correct steps applicable to our trucks in terms of center console trim removal?

 

[The Weatherman]

Man, I’m glad I had the 15” screen in mine. I did not remove anything on the dash. Just removed the side trim and top trim Easy Peasy; Bobs your uncle.

Might look closely here because I think some that removal is based on removing the column shifter and connecting the stable one.

 

[MarkTJ97]

For those of you with 12" displays having done this mod... Does the video below show the correct steps applicable to our trucks in terms of center console trim removal?

Hey, I just did this mod on my XLT with 12" screen. Wish I had watched this video first! But yes, our dash trim removal is very similar. Start at top like he did , then pop off the long horizontal piece that contains the push to start switch. From there, just remove the 4 screws from climate bezel . I didn't disconnect any connectors, there is enough slack to just rest it on front storage area. Then off with the lower trim and console bezel. I did remember to stow handle prior to removal, just to make it easier to store if I want to revert back.

Wasn't too bad, did it in the dark, but did manage to lose a trim clip by the passenger air vent.
Worth the wait for 3D print, and I am enjoying it so far. I will say, I must have rested my hand on shifter more than I realized, keep catching myself reaching for it and feeling my hand drop haha.

Good luck, let me know if you have any questions.

Sponsored