Stick to Rotary Shift Knob Conversion w/ 3D Printed Rotary Shifter Holder

[The Weatherman]

Man, I’m glad I had the 15” screen in mine. I did not remove anything on the dash. Just removed the side trim and top trim Easy Peasy; Bobs your uncle.

Might look closely here because I think some that removal is based on removing the column shifter and connecting the stable one.

Sponsored

 

[MarkTJ97]

For those of you with 12" displays having done this mod... Does the video below show the correct steps applicable to our trucks in terms of center console trim removal?

Hey, I just did this mod on my XLT with 12" screen. Wish I had watched this video first! But yes, our dash trim removal is very similar. Start at top like he did , then pop off the long horizontal piece that contains the push to start switch. From there, just remove the 4 screws from climate bezel . I didn't disconnect any connectors, there is enough slack to just rest it on front storage area. Then off with the lower trim and console bezel. I did remember to stow handle prior to removal, just to make it easier to store if I want to revert back.

Wasn't too bad, did it in the dark, but did manage to lose a trim clip by the passenger air vent.
Worth the wait for 3D print, and I am enjoying it so far. I will say, I must have rested my hand on shifter more than I realized, keep catching myself reaching for it and feeling my hand drop haha.

Good luck, let me know if you have any questions.

 

[Rice_classic]

Great thread and thanks to it, I just bought a 3D printer.. awesome.

I guess I can cancel my order on the Etsy shop now.

 

[rio]

Hey, I just did this mod on my XLT with 12" screen. Wish I had watched this video first! But yes, our dash trim removal is very similar. Start at top like he did , then pop off the long horizontal piece that contains the push to start switch. From there, just remove the 4 screws from climate bezel . I didn't disconnect any connectors, there is enough slack to just rest it on front storage area. Then off with the lower trim and console bezel. I did remember to stow handle prior to removal, just to make it easier to store if I want to revert back.

Wasn't too bad, did it in the dark, but did manage to lose a trim clip by the passenger air vent.
Worth the wait for 3D print, and I am enjoying it so far. I will say, I must have rested my hand on shifter more than I realized, keep catching myself reaching for it and feeling my hand drop haha.

Good luck, let me know if you have any questions.

Awesome! Thanks for the tips. I 3D printed my console yesterday and now waiting for the new shifter to arrive!

 

[CRAIGC540]

Great thread and thanks to it, I just bought a 3D printer.. awesome.

I guess I can cancel my order on the Etsy shop now.

Which 3D printer?

 

[Rice_classic]

Which 3D printer?

Creality K1 max.

 

[CRAIGC540]

Creality K1 max.

Nice.. I'm looking at that or Bamboo P1S with the element feeder.

 

[rio]

Got mine printed yesterday. Used @masonta 's model (thanks!) with the Nalgene holder. I have an Elegoo Centauri Carbon and used PETG-GF (glass fiber) filament. I am blown away at the print quality! I love the finish just the way it came out.

 

[TechnoSwiss]

Wow that PETG-GF came out really nice, what was your layer height on that?

 

[rio]

Wow that PETG-GF came out really nice, what was your layer height on that?

Just kept it to the standard 0.2 mm. The whole print took about 10 hours and used less than 400 grams of material.

 

[VAL.ABAPO]

Got mine printed yesterday. Used @masonta 's model (thanks!) with the Nalgene holder. I have an Elegoo Centauri Carbon and used PETG-GF (glass fiber) filament. I am blown away at the print quality! I love the finish just the way it came out.

Nice. I'm trying that next.
Here's my PLA-CF

 

[rio]

Nice. I'm trying that next.
Here's my PLA-CF

That looks so good! Did you print that an an angle?

 

[VAL.ABAPO]

That looks so good! Did you print that an an angle?

No. Lucky enough to print and orient it flat.

Sponsored