✅ 1/9/2023 Lightning Build Week Group (MY2023)

[Sealevel]

Yeah, I had that since 11/23, but the build week was 1/9 so i wasn't expecting anything to happen. I have the date assigned now, which matches the blend date on the window sticker. When is your Blend date?

What is your number in the batch? Mine is 276 of 715? (small numbers just to the left of the 8 digits of your VIN on the Window Sticker)

Sponsored

 

[TaxmanHog]

My status was updated to 'In Production' today! Blend Date was yesterday (1/11) and my 'In Production' date is listed as 1/11. So far, on schedule... Lariat ER

That means the whole production week should be just in time, a good sign!!!

 

[Lightning Rod]

What is your number in the batch? Mine is 276 of 715? (small numbers just to the left of the 8 digits of your VIN on the Window Sticker)

If I'm looking at the right number, my sticker says 59/314. Are you saying that I'm in line and I'm 59 of 314?

 

[Sealevel]

I'm saying, that is how we tracked MMe production. The 314 number is confusing, 4 weeks of producing 700 odd units would be 3,000 or so. Perhaps the batch numbers refer to different batches in the same week. Anyway, good luck to us all that we stay on track. ?

 

[TaxmanHog]

If I'm looking at the right number, my sticker says 59/314. Are you saying that I'm in line and I'm 59 of 314?

Those values are for spray in liner trucks for the week of 1/9 there are 314 of them

Your intermixed with the non spray in trucks based on the four digit sequence 2 code to the right of your blend day.

 

[Sealevel]

Those values are for spray in liner trucks for the week of 1/9 there are 314 of them

Your intermixed with the non spray in trucks based on the four digit sequence 2 code to the right of your blend day.

Thank you for the further educational information. My XLT will not have a liner.

 

[Webbo85]

43 of 314, and I did get the spray in bedliner at TaxmanHog surmised. Here's the top of my Window sticker

 

[Lightning Rod]

Those values are for spray in liner trucks for the week of 1/9 there are 314 of them

Your intermixed with the non spray in trucks based on the four digit sequence 2 code to the right of your blend day.

Thanks.

I'm still learning all of these numbers.

 

[Its PJ Bia]

Looks like I'm 370/715. No bed liner for me.

 

[EVMainer]

Today (1/12) is my blend date. Hopefully they are on schedule and there won't be any chip holds. Would love to get to rip around in the snow in February!

 

[Its PJ Bia]

Today (1/12) is my blend date. Hopefully they are on schedule and there won't be any chip holds. Would love to get to rip around in the snow in February!

A fellow Mainer! What dealer did you go through?

 

[Sealevel]

I HAVE MODULES POPULATED!

 

[Lightning Rod]

I HAVE MODULES POPULATED!

Where do you find that out?

 

[Sealevel]

Where do you find that out?

Post #46 in this thread has a link for Modules and Tear Tag. It only requires your VIN to see the list of modules.

It is for repair techs to use for diagnostics (I think) - but the list indicates when a vehicle is built to the point where the electrical system is activated. I don't do DIY repairs, so it isn't something I'll use, but it tells me my XLT will be rolling toward Memphis in a few weeks.

 

[buttah_hustle]

Dropping my details in here for today's blend date on my Pro. I'm 389/715, and @Its PJ Bia was 370/715 with yesterday's blend date. So I am envisioning my truck getting pieced together as we speak this morning.

Sponsored