Power-Up OTA 6.5.0 - Minor Adj {Heated wheel & Dep Times}

[BennyTheBeaver]

Just got this notification today. It is an update that is scheduled (truck needs to be in park and unusable).

Sponsored

 

[TaxmanHog]

Stuck & standardized thread title

 

[flyin525]

I got it too. I was greeted with 56% power and front motor not working as soon as it installed. Great.

 

[sotek2345]

I got it too. I was greeted with 56% power and front motor not working as soon as it installed. Great.

Did a power cycle clear that?

 

[flyin525]

Did a power cycle clear that?

I tried a couple times on the side of the road but it didn’t help. I’ll let it sit for a while and try again.

 

[BennyTheBeaver]

Update successful via Update Now.

 

[rugedraw]

For the ICE trucks, it was an SCCM update. Most likely the same for you guys. Wording used when Ford files the update with the NHTSA is:

 

[GDN]

Well - I'm back at the adults table. Got the "unknown" update last night. No description and no numbering of any kind and then received 6.5 in the last hour.

@rugedraw - if you'd like to check I offer my VIN - 1FTVW1EV3NWG03253.

@Mike G - Also notes that an IPC had downloaded to his truck. So that should be coming in an update soon.

 

[Whammy Bar]

I hate the cryptic general "minor adjustments" detail. Tell me what you did @Ford Motor Company

I feel like this update made my steering wheel hotter. But who really knows.

 

[flyin525]

I tried a couple times on the side of the road but it didn’t help. I’ll let it sit for a while and try again.

After letting it sit for about 30 minutes, the front motor seemed to work again.

 

[F150ROD]

Yeah got an update also, no wonder my radio was turned off in the AM lol….

Ford Pass is atrocious at Notifications

 

[flyin525]

For the ICE trucks, it was an SCCM update. Most likely the same for you guys. Wording used when Ford files the update with the NHTSA is:

I wonder if this will help preconditioning and heated steering wheel issue @TaxmanHog

 

[rugedraw]

Well - I'm back at the adults table. Got the "unknown" update last night. No description and no numbering of any kind and then received 6.5 in the last hour.

@rugedraw - if you'd like to check I offer my VIN - 1FTVW1EV3NWG03253.

@Mike G - Also notes that an IPC had downloaded to his truck. So that should be coming in an update soon.

Yea, same update. Updates the strategy for the SCCM:


Module Data Details

Target Identifier	Current Software #	Previous Software #	File Size
Module: SCCM STEERING COLUMN CONTROL MODULE
F188	RL3T-14C579-BD	ML3T-14C579-AH	197.88 KB

 

[Chuin]

After letting it sit for about 30 minutes, the front motor seemed to work again.

I had the same issue. I would maybe wait for a day or two for the update.

 

[Blochead21]

This update is pending for me as well. I’m in no rush with the apparent issues to force it to install.

Sponsored