ECU module programming guide using FDRS

[rugedraw]

Sync software version 23306_product revision 1076

I guess I should have also asked what was it on before, too. Just scan the truck and see if the APIM is still there or if it cleared and something else popped up in its place.

Sponsored

 

[Scorpio3d]

I guess I should have also asked what was it on before, too. Just scan the truck and see if the APIM is still there or if it cleared and something else popped up in its place.

Yeah, I should have checked prior but did not so I don’t know what version I was on. I don’t remember if I took a pic of it before I look back through, but no big deal thanks.

 

[Scorpio3d]

I guess I should have also asked what was it on before, too. Just scan the truck and see if the APIM is still there or if it cleared and something else popped up in its place.

As I stated earlier, it updated something because I had these icons (top left)until the “failed“ update

 

[Scorpio3d]

Tried it again and it went through successfully did not change my Sync version though? (What is the current highest version of SYNC?)
30 minutes into IPMA…. Hopefully this one is not as long as the first one, but at least I have the proper power supply this time.?
On a sidenote, I do love my fold down armrest/console for doing these updates.

I am old school and like a physical mouse!
I seem to click on the wrong stuff when I use the touchpad so the mouse makes it easier!

 

[rugedraw]

Tried it again and it went through successfully did not change my Sync version though? (What is the current highest version of SYNC?)
30 minutes into IPMA…. Hopefully this one is not as long as the first one, but at least I have the proper power supply this time.?
On a sidenote, I do love my fold down armrest/console for doing these updates.

I am old school and like a physical mouse!
I seem to click on the wrong stuff when I use the touchpad so the mouse makes it easier!

The highest available is 24127, but it has not been released for all vehicles yet. If you're on Sync 23306 and there are no more APIM, GWM, TCU or IPC updates showing, then you have gotten as far as you can get for now until Ford releases the next batch of updates for your VIN.

IPMA will take 2.5-3 hours.

 

[Scorpio3d]

Has anyone used the Ford VCM 3? And what are the advantages/differences between that and the J2534 pass-through type?

 

[rugedraw]

Has anyone used the Ford VCM 3? And what are the advantages/differences between that and the J2534 pass-through type?

It writes faster than the Mongoose....that's it.

 

[Scorpio3d]

The highest available is 24127, but it has not been released for all vehicles yet. If you're on Sync 23306 and there are no more APIM, GWM, TCU or IPC updates showing, then you have gotten as far as you can get for now until Ford releases the next batch of updates for your VIN.

IPMA will take 2.5-3 hours.

Yeah, I figured it would take that long again…

 

[Scorpio3d]

It writes faster than the Mongoose....that's it.

So instead of 2 1/2 to 3 hours for these updates maybe half of that or do you know?

 

[bmwhitetx]

I am old school and like a physical mouse!
I seem to click on the wrong stuff when I use the touchpad so the mouse makes it easier!

I know what gift I'm bringing you at our next meetup! Two hours ago, I was cleaning out a drawer and decided to throw this away. Not now. It's yours as a backup. Even faded yellow like yours! And PS/2 compatible.

 

[Scorpio3d]

Hahaha…
That is absolutely Hilarious I must’ve laughed for two minutes! I probably still have the PS/2 adapter somewhere! Yes, I am a pack rat!
I do have newer and smaller (better looking)mice but this one’s great to just throw around. If I drop it in the driveway or something, it’s no big loss.
I just thought about I could put under my frunk to scare away the real mice-so if they try to move in again, they will realize it’s already occupied!

 

[bmwhitetx]

I probably still have the PS/2 adapter somewhere!

Wow, is it your lucky day! Cleaned out those also. Both PS/2 to USB and PS/2 to 9-pin serial for those really old laptops. How many should I bring you?

And to stay on topic, Ford mobile tech did my IPMA in 42 minutes.

 

[rugedraw]

So instead of 2 1/2 to 3 hours for these updates maybe half of that or do you know?

I believe it does it in about half the time, yes. However, for the difference in price, the Mongoose and 3 hours is just fine by me. lol

 

[Scorpio3d]

Wow, is it your lucky day! Cleaned out those also. Both PS/2 to USB and PS/2 to 9-pin serial for those really old laptops. How many should I bring you?

And to stay on topic, Ford mobile tech did my IPMA in 42 minutes.

Wow! Looks like you are a pack rat as well???
May have to look into the VCM 3!
Do you know if that’s what he used?

 

[Scorpio3d]

Wow, is it your lucky day! Cleaned out those also. Both PS/2 to USB and PS/2 to 9-pin serial for those really old laptops. How many should I bring you?

And to stay on topic, Ford mobile tech did my IPMA in 42 minutes.

You never know!
After the zombie apocalypse when you have to boot up an old 386/486 with windows 3.1 or older you may need those!

Sponsored