F150 Lightning FORScan thread - Version 2

[bmwhitetx]

So for the front camera not popping up on approach, if my value is B, I am SOL? Sucks because it worked before I brought the truck in for firmware updates this summer..

Which post are you referring to? What setting?

Sponsored

 

[digitaldad]

Tried a little search before asking, but declaring that I'm more focused on 12v LVB power draining as of late...

When it comes to FORScan programming instruction: start/power on but don't start "engine" (meaning ACC mode), can one just physically start the Lightning, when it comes to our trucks?

I always follow the steps as shown, so was just curious.

 

[ragj1976]

Which post are you referring to? What setting?

This mod :

Fix front camera not popping up on screen when front sensor activated (source)
IPMA: 706-16-01 xxx*-xxxx-xxxx
if old value 0-7 then add 8 (hex) to get new value. For example 3=>B. If current value is 8-F, then this is not for you. Applicable to trucks without Park Assist and BC.

 

[PJnc284]

You can try changing it to another value, writing and then change it back. Believe that resolved another issue someone had a while back

 

[ragj1976]

I chang

You can try changing it to another value, writing and then change it back. Believe that resolved another issue someone had a while back
[/QUOTE

I changed B to a 3. Not sure why, and obviously it didn’t do anything. Your saying maybe add 8 to the 3 and try that?

 

[PJnc284]

If it was B previously, change back to that and try.

 

[chriserx]

Downloading on a standard windows 10 laptop from the forscan website listed in post # 2. Nothing hijacked. Windows defender set on medium security. If my wife was here I'd download it on her computer.

Mostly I need to know if it's Arm or AMD/Intel.

AMD/Intel/x86 - with all of the problems you've encountered, best I can say is uninstall and then go its file folder and remove manually any remaining files. Reinstall it to a completely different location.

Arm - Go to properties, compatibility and change your emulation settings, exact settings can vary, if you get this far and need assistance I can give you mine but I'm running on a Mac in a VM on Windows 11 Arm (though it should be close)

I mean no offense by my following statement but you don't seem to have a strong technical aptitude and that's fine. All you really need is a willingness to learn and not be afraid to break shit. I only say this because both the post you referenced and your reply give no details about processor architecture and that's one of the most important details about getting up and running. Screenshots and/or debug traces would also be extremely helpful in diagnosing the issue.

In the meanwhile, download a fresh copy of forscan 2.3.68
Open a command prompt
Type powershell
Type get-filehash your_path_and_filename_here
Ensure the output hash is C684EE00871D6039E931291D36134D9B9D977154CDB75087C999EC9F9D1D85E0

Sponsored