Ford app 6.3.0 update iOS & Android

[K6CCC]

I replaced my Android phone Friday so new installation. 6.3.0, but no PPO option.

Sponsored

 

[TaxmanHog]

Whoa… PPO just showed up in my app for the very first time! Has any noticed that “Departure Times” keeps moving back and forth between the first two tabs?

I had noticed the shift back & forth, but as of now it has settled on the Vehicle tab

 

[Kakaratto]

I now have Pro Power Onboard in the iOS app as well. (6.3.0)

 

[Blochead21]

I still haven’t gotten my pro power option back.

 

[The Weatherman]

I haven’t gotten it to start with!

 

[Zprime29]

No PPOB option for me either yet (android). I wonder if you need to have used it recently?

 

[MountainAlive]

No PPOB for me either (6.3.0 on iOS). But at the risk of jinxing it, my PAAK has been working way better on this app version.

 

[Up 2 White Lightning]

I am somewhat excited that i actually have the pro power tab on my app, it seems like I am really up to date on something, however I am struggling with the other aspects.
My app is currently showing my current charge rate and battery percentage, but I CAN NOT adjust my preferred charge level anymore. It is stuck at 100% and doesn't accept my lowering it to any other percentage. Is anyone else having that issue? I can go to the truck screen and lock and unlock so there is connectivity between the two.

 

[BriyGuyUSA]

No Pro Power for me. iPhone running iOS 26 with App version 6.3.0.

Side note, used my bed power connector yesterday and I could have sworn that there was supposed to be an option on the screen to allow it to be used with the "engine" not running, but was not there. Had to sit there with the screens powered on wasting power.

 

[K6CCC]

No PPOB option for me on my Android...

Side note, used my bed power connector yesterday and I could have sworn that there was supposed to be an option on the screen to allow it to be used with the "engine" not running, but was not there. Had to sit there with the screens powered on wasting power.

Yes, there is an option on the PPOB screen (at least on my 15 inch center screen). It's part way down (below the part that is seen without scrolling down). Note that it still has the power minimum requirement to stay on if the vehicle is off.

 

[jrex727]

No Pro Power for me either. I have 6.3.0 on Android. I read in here that others were asking to have the "Make this phone a key" banner removed from the home screen. That would be nice, or at least let me close it out. My last installed update was 10/13/2025 for BlueCruise Toggles and Walk Away lock. Sync 4 version 25094_PRODUCT Revision 1779

 

[I <3 My Lightning]

No Pro Power for me. iPhone running iOS 26 with App version 6.3.0.

Side note, used my bed power connector yesterday and I could have sworn that there was supposed to be an option on the screen to allow it to be used with the "engine" not running, but was not there. Had to sit there with the screens powered on wasting power.

That is for 2024 and later.... Your profile states you have a 2023.

Yes, there is an option on the PPOB screen (at least on my 15 inch center screen). It's part way down (below the part that is seen without scrolling down). Note that it still has the power minimum requirement to stay on if the vehicle is off.

That's because you have a 2024...

 

[BriyGuyUSA]

That is for 2024 and later.... Your profile states you have a 2023.

Ahh - that makes sense. Is there a way to update to the 2024 version or was there hardware changes too?

 

[BriyGuyUSA]

Ahh - that makes sense. Is there a way to update to the 2024 version or was there hardware changes too?

Answered my own question. Seems it is/was supposed to come in one of these elusive software updates. https://www.f150lightningforum.com/...can-now-be-used-with-vehicle-off.16491/page-3

 

[TaxmanHog]

Wouldn't it be AWESOME if Ford standardized the software function and features across all model years, provided the supporting hardware would allow that!?!?!?!?

Sponsored