Ford app 6.3.0 update iOS & Android

[astrand1]

Pro power just appeared in the app for me! Wasn’t there yesterday.

Bastard!

Sponsored

 

[davehu]

I replaced my Android phone Friday so new installation. 6.3.0, but no PPO option.

I still don't have it either. I think those that are seeing it have iOS and perhaps in a beta type program.

No Pro Power for me either. I have 6.3.0 on Android. I read in here that others were asking to have the "Make this phone a key" banner removed from the home screen. That would be nice, or at least let me close it out. My last installed update was 10/13/2025 for BlueCruise Toggles and Walk Away lock. Sync 4 version 25094_PRODUCT Revision 1779

Bastard!

ios or android?

 

[astrand1]

I still don't have it either. I think those that are seeing it have iOS and perhaps in a beta type program.


ios or android?

iOS for me. 26.2

 

[Mike G]

6.4.0 is out now...I guess you all know that.

 

[BriyGuyUSA]

6.4.0 is out now...I guess you all know that.

What device platform? Not seeing it yet for iOS and play store shows last update of 11/21.

 

[K6CCC]

6.4.0 is out now...I guess you all know that.

Nope. Not available for me on my Android. And still no PPO...

 

[Athrun88]

PPOB just showed up for me. Android, 6.3.0, 2024 Lariat. Shame it's just monitor only. Would be nice to actually control the outlets from the app!

 

[davehu]

PPOB just showed up for me. Android, 6.3.0, 2024 Lariat. Shame it's just monitor only. Would be nice to actually control the outlets from the app!

same here... just showed up. now if 6.4 will get rid of the stupid PAAK message and move it to the bottom of the page, not the top.

 

[K6CCC]

Still no PPO option on 6.3.0 and version 6.4.0 not yet available to my Android.

 

[VTRedWingsFan]

IOS 26.2
Ford 6.3
Lariat ER

PPOB magically just showed up.

 

[I <3 My Lightning]

Well I am just about to install but today I got this error when I went to turn on the bed outlets to complete the once a month ground fault test. So even if the pro power option shows up, I have bigger issues to tend to.

Edit: No pro power option, no message under alerts and eventually this warning showed up in the app messages.

It does appear there was some font changes in 6.3.

Well this error went away, then it got cold out and it came back this past Thursday when I checked to see if it was still working... but this time it didn't leave any app messages like last time. Then everything was back working again... And my saved app messages from the first time I got this message mysteriously all disappeared ...

So look here what showed up. Coincidence? .... Android and profile shows my model.

 

[fhteagle]

Nifty new bug: deleting a vehicle alarm triggered message doesn't actually clear it from the home screen. Required not just app force stop, but also cache clear to get that old alert box off my home screen ....

Cmon Ford ...

 

[TaxmanHog]

Seeing some samples of Android users getting the PPOB feature in Ford App prompted me to get out to the truck and exercise the on/off switches and run the ground fault test & reset to see if I could trigger data to the cloud and thereby cause information to show in the app.

My wife's Ford App 6.3.0 is showing it but mine continues to lack the feature, I wonder if I were to fully delete the app (clear cache & data profiles before doing so) then redownload it would help, did anyone already try that?? I hate having to go through the motions of reconfiguring the PAAK and then find that I'm still stuck.

Her Ford app ---------------------------Mine

----

 

[I <3 My Lightning]

@TaxmanHog, I just checked my bosses phone after reading your post. She is an invited secondary driver. Her app does not have the pro power showing. I went and force stopped and cleared cache and still it is not showing.

All the app messages were still showing after clearing the cache, the new outlet test today and even a message from August about Alexa service changes, but yet all the failed bed outlet not activating were all gone. Some funny stuff happening on the ford server side.

 

[skotman01]

I did some digging into the API JSON payloads via home assistant. I have a 2023 Lariat ER with the 9.6kw PPOB.

There is a value being returned under vehicle profile labeled proPowerZones, mine is set to 0, and PPOB doesn’t show in the app. There is another value labeled proPowerApplink, mine is set to false.

oddly enough there is yet another value labeled proPowerOnBoard and its set to display.

I think I’m just going to use my home assistant setup and build my own PPOB/Zone lighting control.

Sponsored