My first time using Car Scanner

[roddiaz1]

Do you have ABRP running? It may try to connect to the dongle first and that can cause problems

@B177y posted here that they installed an OBD Y-splitter and a second dongle to run ABRP and CarScanner at the same time

Thanks for the advice guys. It seems that the CarScanner software setting was set on WiFi, and all I needed to do was set it to BlueTooth. Now it is connecting to the VgatevLinlk MC+.

I appreciate the input.

Sponsored

 

[chapba]

I cant for the life of me figure out how to get the ECU to connect with iOS with the MX+ OBD reader. Anyone have any tips??

 

[chriserx]

I cant for the life of me figure out how to get the ECU to connect with iOS with the MX+ OBD reader. Anyone have any tips??

https://apps.apple.com/us/app/obdlink/id879636351
Downloading this will make it easier but it isn't necessary.
Manually first connect using
Settings -> Bluetooth
Press or hold connect button (don't remember which) on the MX+ and wait for it to popup in settings.
Once connected there, use CarScanner to connect.
If it's anything like mine that stays plugged in, you'll occasionally have to unplug the MX+ to reconnect if you encounter further issues.

 

[chapba]

Yeah I’ve tried several times but will give it another go tomorrow. It connects to the first connection easily but continues to fail on the ECU (2nd) connection no matter what I try. When I was doing research the consensus was that the obdlink app (the one you linked) didn’t work since it’s an electric truck and they didn’t support it but I’ll try that as well. Looks like it’s the only way to update the reader as well and maybe that’s what I need to do?

 

[chriserx]

It does 'work' but it's not particularly useful imo, what you are encountering is what I was referring to when I mentioned unplugging it. Not sure the cause but it fixes it for me.

 

[chapba]

It does 'work' but it's not particularly useful imo, what you are encountering is what I was referring to when I mentioned unplugging it. Not sure the cause but it fixes it for me.

awesome man! Thanks for the help. I’ll try it again tomorrow and see if your method works! You’re using an iPhone correct? I did read that android was easier to connect. Oh and I did get the scanner app to use with the reader so I figured not using the obdlink app was ok.

 

[chriserx]

awesome man! Thanks for the help. I’ll try it again tomorrow and see if your method works! You’re using an iPhone correct? I did read that android was easier to connect

Yup 11 Pro 26.3 Beta 3

 

[chapba]

Yup 11 Pro 26.3 Beta 3

I’m still on iOS 18 on a 14 but I doubt me not being on 26 is the issue (hopefully!)

 

[mr.Magoo]

Yeah I’ve tried several times but will give it another go tomorrow.

Apologies for pointing out what might be seen as obvious, but the truck need to be on to be able to read any data.

If the truck is off, you'll still be able to connect to the dongle itself but the truck won't respond.

 

[chapba]

Apologies for pointing out what might be seen as obvious, but the truck need to be on to be able to read any data.

If the truck is off, you'll still be able to connect to the dongle itself but the truck won't respond.

Yup it’s on. Just won’t make a connection to ecu. Did some more reading on the forum and looks like a reset, reinstall and/or re-connection work for folks that run into the same issue.

 

[PJnc284]

Think i experienced a glitch in the matrix this morning. Remote started the truck and when I got in and pushed the start button, the SOC dropped, the battery power jumped up to 1MW and the coolant temp went negative before returning to normal. First time I've seen that behavior.

Sponsored