ECU module programming guide using FDRS

[Lodans]

@Jesse-Infotainment I'm 45mins in after restart on the GWM and nothing popping up yet on a success... thoughts?

I had the same thing happen to me. I turned off the ignition waited 3 minutes and started the truck and it came back with a success.

Sponsored

 

[Lodans]

I was able to get all the updates to go through but still have the IPMA, PCSM, GCM and ABS module showing in the updates. I can confirm that BC is working as I used it this morning on the way into work so I think there is a bug keeping them in the list. I also have cameras in motion and the side card for the bed camera.
If anyone is in the Austin area and wants to borrow my mongoose PM me or if you would like help let me know. It was worth the 5 1/2 hours it took. Blue Cruise baby.

 

[Jesse-Infotainment]

@Jesse-Infotainment I'm 45mins in after restart on the GWM and nothing popping up yet on a success... thoughts?

Possibly shut back off and let sit a few mins and try again to restart. I only waited about 5 mins after turning engine off when update complete message came up. On restart try with KOEO

 

[nicholsbradley]

I was able to get all the updates to go through but still have the IPMA, PCSM, GCM and ABS module showing in the updates. I can confirm that BC is working as I used it this morning on the way into work so I think there is a bug keeping them in the list. I also have cameras in motion and the side card for the bed camera.
If anyone is in the Austin area and wants to borrow my mongoose PM me or if you would like help let me know. It was worth the 5 1/2 hours it took. Blue Cruise baby.

wish you were in Houston. I would pay to have them updated as I don't really have the time and my sorry dealership won't do it.

 

[Airborne_Ape]

As an FYI,

This is what I was talking about regarding rebooting modules with ForScan. All the modules appear to be listed. So for those of you sitting in your truck with a laptop already open, this could be a quick way to kick an ECU that appears unresponsive. Obviously I wouldn't try rebooting something while it's in the middle of an update though. The list is longer than what's shown. This is version 2.4.5 Beta 3

 

[Bob_Mac]

Possibly shut back off and let sit a few mins and try again to restart. I only waited about 5 mins after turning engine off when update complete message came up. On restart try with KOEO

Appears I'm in a restart loop... going to give it 15 more mins and see what happens.

 

[speedracercjr]

wish you were in Houston. I would pay to have them updated as I don't really have the time and my sorry dealership won't do it.

I'm in Houston and glad to share my Mongoose. I have one person ahead of you for the adapter and they'll get it next week so it may be a bit.

 

[Lodans]

Appears I'm in a restart loop... going to give it 15 more mins and see what happens.

Are you doing key on engine off? If so try Key on engine on, this worked for me.

 

[Snakebitten]

How many people stayed home today, went in to work late or are exhausted from doing updates all hours of the night trying for Bluecruise?

I'm exhausted, staying home from work today, just from WATCHING yaw

It's a mongoose-bluecruise flurry!

 

[rpeterslll]

The thread has some great information! Thank you everyone for reporting your experiences with the updates.

One thing is not clear to me is if the current APIM software offered by FDRS will address the OTA failure update on Job 1 F150’s that have been attempted to update to 1.7.1? Will this procedure apply the update successfully from F150’s in this failure state?

 

[JasonATL]

Anyone in the Atlanta area with a mongoose?

 

[nicholsbradley]

I'm in Houston and glad to share my Mongoose. I have one person ahead of you for the adapter and they'll get it next week so it may be a bit.

I have the mongoose adapter being delivered today. I just don't have a way to do them here I am here working and I only have a corporate apartment at Accent City Center with no outlet outside for the charger.

 

[Bob_Mac]

Are you doing key on engine off? If so try Key on engine on, this worked for me.

I am doing KOEO as per the instructions...

 

[Snakebitten]

The thread has some great information! Thank you everyone for reporting your experiences with the updates.

One thing is not clear to me is if the current APIM software offered by FDRS will address the OTA failure update on Job 1 F150’s that have been attempted to update to 1.7.1? Will this procedure apply the update successfully from F150’s in this failure state?

Rpetersill, it could be said that in many ways that's exactly why many of us landed here. It IS why there's a run on mongoose adapters and folks are driving around this morning with a coffee cup in their left hand acting like that's normal. ?

Yes, is the answer

 

[imnuts]

Happy BlueCruise day (hopefully) for everyone. I finally had a chance to get started and got the Mongoose going and did a network scan. This is the only DTC I have, if I understand it correctly I need to PMI it and choose that the module was replaced?

I went through the PMI process on mine and it got rid of that DTC. I was lucky and it only took one time, others had to do it multiple times.

Sponsored