Comma AI self driver assistant

[truthlesshunter]

I think the culture of Konik is customer centric, and if the cost is equal once you consider the international shipping and fees, there is no reason not to choose them, especially if you want a smooth customer service experience.

in Canada so the international shipping is a wash for me...good to know! I'll keep an eye on a harness to try to out

Sponsored

 

[Ajzride]

in Canada so the international shipping is a wash for me...good to know! I'll keep an eye on a harness to try to out

I suppose that is the downside. Comma isn’t shipping harnesses unless packaged with a C4 currently.

 

[UncleTony]

I suppose that is the downside. Comma isn’t shipping harnesses unless packaged with a C4 currently.

They showed back in stock last I looked. I was shopping for some odds and ends and noticed they weren’t on back order anymore.

 

[Ajzride]

They showed back in stock last I looked. I was shopping for some odds and ends and noticed they weren’t on back order anymore.

People must have snatched them up. I just checked and they are gone again

 

[UncleTony]

People must have snatched them up. I just checked and they are gone again

Could have been a mistake at the time when I looked. They had the full harnesses on back order before, but you could order all the pieces separately, so it seems like they aren’t even sure at this point

 

[galstaf]

I am banned from their discord for criticism of their documentation, so you can guess how likely it is that will change.

It is pretty pathetic. I admire their work, but when I hear stories like about their disdain for their customers it is troubling. You are making their product better and more valuable at no cost to them.

 

[Lake Placid Lightning]

Thank you. That's enough information for me to decide the FitCam has to be relocated, not the C4. My wife fights motion sickness enough as it is, I definitely don't want to make it worse. LOL

I'm about to pull the trigger on a C4 and currently have a FitCam. How and where did you relocate it?

 

[galstaf]

I shipped most of the orders today. I ran out of cases for the last two that came in, but they will be out tomorrow. You will get an email from pirate ship once the label is created and I typically drop them off the same day as the label is created.

was mine one of the stragglers by any chance? It would be great to get all the parts together if possible.. The C4 is due to be here tomorrow so they say.

 

[Lake Placid Lightning]

I currently have an OBDLink CX plugged into my OBD port for use with the A Better Route Planner (ABRP) app.

If install a C4, will the OBDLink CX have to be removed from the OBD port?

 

[Ajzride]

I currently have an OBDLink CX plugged into my OBD port for use with the A Better Route Planner (ABRP) app.

If install a C4, will the OBDLink CX have to be removed from the OBD port?

ODB2 is optional for F150. It is only there to keep the device powered between drives. The IPMA provides power when the truck is started. If you want power between drives, you can use an ODB2 port splitter.

 

[Unstablerocket]

I currently have an OBDLink CX plugged into my OBD port for use with the A Better Route Planner (ABRP) app.

If install a C4, will the OBDLink CX have to be removed from the OBD port?

No, You do not HAVE to use the OBD port for the C4 if you don't want to.

 

[B177y]

I'm about to pull the trigger on a C4 and currently have a FitCam. How and where did you relocate it?

I have the larger Comma C3x with an @Ajzride sliding dock with a FitCamX. I have the C3x dock mounted below the FitCamX so that it blocks the view of the hood in the FitCamX. The C4 would work just as well in the same position I would imagine. With the Comma screens you see "through" the Comma so it isn't really blocking anything.

 

[Ajzride]

I have the larger Comma C3x with an @Ajzride sliding dock with a FitCamX. I have the C3x dock mounted below the FitCamX so that it blocks the view of the hood in the FitCamX. The C4 would work just as well in the same position I would imagine. With the Comma screens you see "through" the Comma so it isn't really blocking anything.

You don't really see through the C4 though. The screen is super tiny.

I've volunteered multiple time to help design and 3D print a relocation bracket for the FitCamX. No one has taken me up on it yet.

 

[Unstablerocket]

You don't really see through the C4 though. The screen is super tiny.

I've volunteered multiple time to help design and 3D print a relocation bracket for the FitCamX. No one has taken me up on it yet.

I would be very interested in a FitCamX relocation bracket to properly position the C4. I don't know how I missed your previous offers. Hopefully, others will speak up as well.

 

[Lake Placid Lightning]

I've volunteered multiple time to help design and 3D print a relocation bracket for the FitCamX. No one has taken me up on it yet.

How would an interested party take you up on your offer to help design and 3D print a relocation bracket for the FitCamX?

I'd like to incorporate a slide mount for the C4 with the FitCam relocation bracket.

FYI...I have zero 3D print ability.

Sponsored