Comma AI self driver assistant

[Ajzride]

Any chance anyone has a photo of the Comma mounted below their FITCAMX? I really don’t want to hinder my visibility by mounting too low, but I’d also prefer to keep a separate dash cam.

Check the Gen14 forum, I think there was one or two users there.

Sponsored

 

[UncleTony]

Alright everyone. The couplers are officially sold out. The link is still good for placing a reservation for the next batch. The expected lead time is 4 weeks. But it can take up to 6 weeks. There is a $15 non refundable deposit on these to make sure i dont get a bunch of dead orders.

 

[B177y]

Any chance anyone has a photo of the Comma mounted below their FITCAMX? I really don’t want to hinder my visibility by mounting too low, but I’d also prefer to keep a separate dash cam.

I don't have a photo, but I used the stock mount and I am now using @Ajzride 's sliding mount under my fitcamx. The stock mount keeps the Comma mounted higher on the windshield than the sliding mount does. I purposely block the view of the hood and a tiny sliver of the road in front of the hood when looking at the fitcamx image while mounting the Comma to get the Comma up as high as possible in the center of the windshield. Even though the Comma is visible in it's entirety under the mirror, I don't consider it as "blocking" my view as it's off to the side and not located in a place that you look at when driving.

 

[AirVeg]

I don't have a photo, but I used the stock mount and I am now using @Ajzride 's sliding mount under my fitcamx. The stock mount keeps the Comma mounted higher on the windshield than the sliding mount does. I purposely block the view of the hood and a tiny sliver of the road in front of the hood when looking at the fitcamx image while mounting the Comma to get the Comma up as high as possible in the center of the windshield. Even though the Comma is visible in it's entirety under the mirror, I don't consider it as "blocking" my view as it's off to the side and not located in a place that you look at when driving.

This is very helpful Thank you

 

[campalex24]

For the new updated Blue Pilot 4.0, to switch models do you have to reinstall? (eg to switch to FoF)

 

[UncleTony]

For the new updated Blue Pilot 4.0, to switch models do you have to reinstall? (eg to switch to FoF)

No, you should be able to pick a new model under the "Models" tab.

 

[Ajzride]

For the new updated Blue Pilot 4.0, to switch models do you have to reinstall? (eg to switch to FoF)

But the vehicle does have to be turned off or the device in “always off-road” to switch models.

 

[campalex24]

But the vehicle does have to be turned off or the device in “always off-road” to switch models.

Thank you both!

 

[UncleTony]

I need opinions. All opinions are welcome, even if they are wrong. My plate needs a fresh coat of adhesive, so ignore the marks on the plastic.

 

[B177y]

I need opinions. All opinions are welcome, even if they are wrong. My plate needs a fresh coat of adhesive, so ignore the marks on the plastic.

I like the smoooove....

 

[Ted23Lightning]

I need opinions. All opinions are welcome, even if they are wrong. My plate needs a fresh coat of adhesive, so ignore the marks on the plastic.

I vote smooth. But both are cool

 

[CerebralPrimate]

The rough one looks like the protective film used for my door sills.

 

[UncleTony]

The rough one looks like the protective film used for my door sills.

It's pretty similar, not nearly as fine though.

 

[cwstnsko]

I need opinions. All opinions are welcome, even if they are wrong. My plate needs a fresh coat of adhesive, so ignore the marks on the plastic.

I personally like the more subtle texture I get from my BIQU Cryogrip Glacier build plate, which to my eye, is between those 2, but a bit closer to the smoother one.

 

[UncleTony]

I personally like the more subtle texture I get from my BIQU Cryogrip Glacier build plate, which to my eye, is between those 2, but a bit closer to the smoother one.

Yeah, I was looking at getting one, but the reviews are so mixed and the texture doesn't look uniform. I am going to snatch a supertack plate as soon as they make one for the H2D.

Sponsored