Bluecruise 1.4 officially being sent out to F150 & Lightnings starting today (12/11/24)!

[Willebrew]

I’ve had the infamous Not Completed message for a few days… hopefully it’ll sort itself out

Sponsored

 

[Puffoluffagus]

I'm assuming the front parking sensor has to be done before getting bc 1.4?
I had the mobile tech out in December to do the 24B56 front sensor as well as the becm. I can tell they did the latter because I looked at the part. But the tech never cleared the csps, so my dashboard still shows the front sensor csp, ( the becm only fell off because it's now expired).

I guess I should call my dealership and clarify what they actually ended up doing.

Otherwise still no bc 1.4 update here on my '23

 

[Pioneer74]

I’ve had the infamous Not Completed message for a few days… hopefully it’ll sort itself out

Mine has been downloading for 2 days. Hasn't given up yet, but I suspect it will.

 

[lipnorth]

Still no 1.4 luv

 

[rugedraw]

I'm assuming the front parking sensor has to be done before getting bc 1.4?
I had the mobile tech out in December to do the 24B56 front sensor as well as the becm. I can tell they did the latter because I looked at the part. But the tech never cleared the csps, so my dashboard still shows the front sensor csp, ( the becm only fell off because it's now expired).

I guess I should call my dealership and clarify what they actually ended up doing.

Otherwise still no bc 1.4 update here on my '23

If the dealer updated the modules, it does not activate the new BC. You would still have to wait for the OTA to come in or you can enable it yourself with FORScan if the necessary updates were done.

Mine has been downloading for 2 days. Hasn't given up yet, but I suspect it will.

Unfortunately, "not complete" means the OTA failed for some reason, so you would have to wait for it to be resent. The trigger is no longer active.

 

[bananaslug79]

I'm assuming the front parking sensor has to be done before getting bc 1.4?
I had the mobile tech out in December to do the 24B56 front sensor as well as the becm. I can tell they did the latter because I looked at the part. But the tech never cleared the csps, so my dashboard still shows the front sensor csp, ( the becm only fell off because it's now expired).

I guess I should call my dealership and clarify what they actually ended up doing.

Otherwise still no bc 1.4 update here on my '23

I don't know if the sensors CSP is *required* for the BC 1.4 update, but you will notice a difference in stock BC regardless. I know that when I had the CSP done, there were many highways that Sparky did a LOT better in hands-free mode than when I had the truck from purchase (probably BC 1.1 or some such, not sure). It was worth the camera headaches to have this upgraded.

 

[F150ROD]

22 Lariat, got it today, in EAP

 

[TaxmanHog]

Bump for current crop of BC 1.4 installs happening today....

 

[Caliber357x]

So I’m taking my ‘23 Platinum in to my local dealer on Tuesday (long story short I inquired about the door noise problem with them and they said I had alerts about the active air dam having an “alert” but not enough of a problem where I am getting a warning on the app or on my dash) and my question is: should I ask them to update me to BC 1.4 (knowing they may say no. Or charge me shop rates for the time) or just…wait? I’ve been lucky that I’ve received regular OTA updates since taking delivery of the truck, but I don’t want to mess that up…I’m also slightly concerned they may notice that I had the gracious help of someone here in the forum help me do some FORscan programming for glare-free and the (kind of functioning) Beosonic…what say you all?

 

[bthanos]

I think you might not get anywhere with BC 1.4 update unless you are in EAP.
might wait till it gets wider availability.

 

[Mashedtators]

and my question is: should I ask them to update me to BC 1.4 (knowing they may say no. Or charge me shop rates for the time) or just…wait?

Can’t hurt to ask. If they want to charge you, tell them no thanks.

 

[3121]

Can anyone confirm getting BC 1.4 without getting the CSP for the front sensors done?

I’m hoping to avoid dropping my truck off at the dealership to spend a day in door-ding alley.

 

[ericpullen]

22 Platinum in EAP and just got mine!

 

[MichaelCA]

22 Platinum in EAP and just got mine!

I think im cursed. I got 10.3 but not 1.4 yet. Also eap. I had the front sensors tsb done already too.

 

[rugedraw]

I think im cursed. I got 10.3 but not 1.4 yet. Also eap. I had the front sensors tsb done already too.

10.3?

Sponsored