🙋‍♂️ What Did You Do To Your Lightning Today?

[Madasahatter1138]

1. AA Torque app for Android Auto with custom LVB monitoring screen, as well as pages for charging info etc. Love this!!

2. Added Katzkin leather seats (in the summer but JUST got them re-installed correctly by dealer) I like them, good materials, but install was a joke.

3. Charge Port and passenger side doors decal inserts from Etsy.

Sponsored

 

[LUXMAN]

3. Charge Port and passenger side doors decal inserts from Etsy.

Do you happen to have a link for these decals?
Thanks

 

[Madasahatter1138]

Do you happen to have a link for these decals?
Thanks

This
https://www.etsy.com/ca/listing/1520342376/ford-f-150-lightning-charge-port-decals

IRL they look like the truck came with them, and I like that it looks like how the XLT Flash will look

 

[Oneand0]

Picked up a wood splitter to help us out prepare for winter.

 

[LUXMAN]

This
https://www.etsy.com/ca/listing/1520342376/ford-f-150-lightning-charge-port-decals

IRL they look like the truck came with them, and I like that it looks like how the XLT Flash will look

Awesome! Thanks. I've been wanting to do this.

 

[bmwhitetx]

This
https://www.etsy.com/ca/listing/1520342376/ford-f-150-lightning-charge-port-decals

IRL they look like the truck came with them, and I like that it looks like how the XLT Flash will look

The listing doesn't have the black with blue outline like your pic. Did you have to custom order from them? I had to do the same for my tailgate (contact seller and do custom).

 

[Madasahatter1138]

The listing doesn't have the black with blue outline like your pic. Did you have to custom order from them? I had to do the same for my tailgate (contact seller and do custom).

Strange, the dropdown menu used to have more options and I had choosen Black with Blue..hmm

 

[Madasahatter1138]

Strange, the dropdown menu used to have more options and I had choosen Black with Blue..hmm

My Bad!
This is the one I got, better options for colours.
Sorry!
Look what I found on Etsy: https://www.etsy.com/ca/listing/1437440582/fender-or-side-port-letters-sold-as-a?ref=share_v4_lx

 

[bmwhitetx]

I added a back trunk (brunk?). I park nose-in in a very tight spot so the frunk is difficult to use. I saw the Last Boks on the ICE forum but the $200 price threw me. Later in that thread someone showed off the Husky bin ($15 at Home Depot). Works like the Last Boks in that it slides forward to load/unload and if you adjust the strap just right it will slide back and hold tight against the tailgate when closed. I used a cam type clamp instead of a ratchet for easy removal.

Great for putting in groceries or smelly take-out food. I have a tonneau so stuff doesn't get rained on and I can remove in 5 seconds if I need the full bed.

Stored position:

Load/Unload position on top of tailgate:

Cam type strap attached to backside with cable ties and small holes drilled through bin :

On the ICE forum, folks put in two side by side and used an expandable bar to hold them in place.

 

[RickLightning]

I have a bunch of the big black totes with yellow lids. On my rubber mat, they rarely move much. Work great.

 

[bmwhitetx]

I have a bunch of the big black totes with yellow lids. On my rubber mat, they rarely move much. Work great.

I had the rubber mat in my old truck and loved it. Still considering it for this one. But I think this brunk will work for what I need. Although I occasionally haul 4x8 sheets of plywood or a college kid's entire belongings, I am more apt now to haul a a bag of greasy burgers or Chinese takeout. Takes a while to get that smell out of the cabin. I wish my garage was a foot longer so I could use the frunk properly.

 

[RickLightning]

Can't use it in mine either. I have a 20 foot garage, with truck 1 inch from wall I have 2 inches at back.

 

[DanielM92563]

Got my new Avalanche gray Lightning a week ago and already installed tint, MX4 Tonneau cover, FitCamX dashcam, stubby antenna, and these Molle panels from BuiltRight industries today- perfect fit, well packaged. Here’s a pic of the panels without accessories. Just waiting on my Etsy lettering for the charge port door and I should be good to go.

 

[UpWithFilm]

I finally got around to making some software updates to my '23 XLT via Forscan and did the following:

• I tied the bed lights I installed a few months ago into my Zone Lighting and enabled the physical on/off button.
• Changed my temp blinkers from 3 to 5.
• Added universal window control (roll front windows up or down with key fob).
• Switched all cameras to be able to be used at speed.
• Turned on the glare free/matrix LED headlight feature.

 

[CaseyCo]

I finally got around to making some software updates to my '23 XLT via Forscan and did the following:

• I tied the bed lights I installed a few months ago into my Zone Lighting and enabled the physical on/off button.
• Changed my temp blinkers from 3 to 5.
• Added universal window control (roll front windows up or down with key fob).
• Switched all cameras to be able to be used at speed.
• Turned on the glare free/matrix LED headlight feature.

Are you just using the 21+ Ford F-150 codes or are you using Lightning specific ones?

Sponsored