Add Charge enhanced charge settings

[21st Century Truck]

My modules were all updated as of mid-May 2025 and I only have a pending frunk update now (not worth the $50 IMHO)... and on my 2023 XLT with its 12-inch screen, this doesn't (yet) work.

I greatly appreciate the heads-up and the discussion!

Sponsored

 

[02Reaper]

I have a 22 XLT with all of the current OTA updates, Including the Sync version listed on the first page. My 3rd digit was already a 6 and the 4th digit was a 4. Changing the 4th digit to a six did absolutely nothing on my truck. I guess I am missing the other updates that have to be done via FDRS.

 

[PJnc284]

I have a 22 XLT with all of the current OTA updates, Including the Sync version listed on the first page. My 3rd digit was already a 6 and the 4th digit was a 4. Changing the 4th digit to a six did absolutely nothing on my truck. I guess I am missing the other updates that have to be done via FDRS.

Not missing much. Only upside atm is having the charging speed on the center screen without having to jump through hoops to get it on the IPC like 24+.

 

[MountainAlive]

It’s going to be a bummer if our 22’ and 23’ trucks can’t do this because of PCM module hardware that only 24’ and above have.

 

[02Reaper]

Not missing much. Only upside atm is having the charging speed on the center screen without having to jump through hoops to get it on the IPC like 24+.

I was hoping I would at least see the charging rate on that screen, but It didn't change a single thing at all. The screen looked and preformed the exact same as before changing the value. I could care less at this point about limiting DC Fast Charging, but I would love the option of limiting AC Charging on the truck side.

 

[LazyElectrons]

I changed my 4 to a 6 and it appears I have enabled these features. I haven’t done any testing other than seeing the charging rate.

 

[priceb]

Thank you for providing this information for us to try. I can confirm that this doesn't yet work on my XLT SR. All relevant modules were updated in mid April. I have left it enabled in preparation for whatever future update might provide the missing piece.

 

[bmwhitetx]

I changed my 4 to a 6 and it appears I have enabled these features. I haven’t done any testing other than seeing the charging rate.

Let us know if you lose your charge locations and/or if resets your charge limits.

Sponsored