Sponsored
PU-Sync-25.2.1.6.5 - Walk Away Lock Toggles: Post 203 Final FIX!
MountainAlive
Well-known member
- Joined
- Apr 18, 2024
- Threads
- 30
- Messages
- 462
- Reaction score
- 678
- Location
- Massachusetts, USA
- Vehicles
- 2023 F-150 Lighting ER 512A Max Tow
Confirming I got this update too and it seems to work nicely. I like how I can set the horn to beep only for walkway lock but no horn on normal locks.
The Weatherman
Well-known member
- First Name
- Dean
- Joined
- Apr 20, 2023
- Threads
- 30
- Messages
- 1,655
- Reaction score
- 2,292
- Location
- South Central KY
- Vehicles
- 2022 RR F150 Lightning Lariat ER, 2020 Explorer PL
- Occupation
- Retired
I’m a 2022 Lariat and received the ‘toggle’ update today while out and about.
Ted23Lightning
Well-known member
Looks like I just got the second part of the WAL update. I’ll test it out in the morning & see if it works.
BluesClues
Active member
Woo got this today after having walk away lock for a while
Sponsored
Ted23Lightning
Well-known member
It works!!!Looks like I just got the second part of the WAL update. I’ll test it out in the morning & see if it works.
GDN
Well-known member
- First Name
- Greg
- Joined
- Feb 15, 2022
- Threads
- 92
- Messages
- 3,690
- Reaction score
- 4,655
- Location
- Dallas, TX
- Vehicles
- Lightning Lariat ER, Performance Y
- Occupation
- IT
Welcome to the forum and to SW updates.
Last edited by a moderator:
Zprime29
Well-known member
- First Name
- Brandon
- Joined
- Jul 26, 2022
- Threads
- 42
- Messages
- 2,447
- Reaction score
- 2,578
- Location
- Tucson, AZ
- Vehicles
- 2022 Lightning ER, 2025 XC90 Recharge
Just noticed I got the second update. I never saw the notification in the truck but I noticed in the app when I went to remote start. Confirmed I have the toggles for WAL. Have not tried it out yet.
Got this update this morning after taking my wife to a doctor's appointment.
I used remote start before we left the house, I checked for any pending updates but nothing new at that point.
After we arrived at the clinic, I did a couple of key cycles, then got a pop up saying Sync was updating and certain features may not be available for a few minutes.
So this is a non inhibit update, about 3 minutes later another pop up stating update completed.
Nothing on Fordpass yet, so I did another key cycle, then the status of software updates in Fordpass reflected this morning's update.
I now have WAL switch controls, I turned it on for now and switched off the honk notification.
I used remote start before we left the house, I checked for any pending updates but nothing new at that point.
After we arrived at the clinic, I did a couple of key cycles, then got a pop up saying Sync was updating and certain features may not be available for a few minutes.
So this is a non inhibit update, about 3 minutes later another pop up stating update completed.
Nothing on Fordpass yet, so I did another key cycle, then the status of software updates in Fordpass reflected this morning's update.
I now have WAL switch controls, I turned it on for now and switched off the honk notification.
Sponsored
sfguy
New member
I recieved this update 3 days ago on my '23 Platinum and all toggles appeared. Have not tested any WAL features but I now have lane change and lane centering. Prior to this neither was available. Seems like this update let me access BC 1.2+ which lurked in my truck all along.
Now on to 1.4?
Last edited:
Got home from the appointments & coffee stop, the WAL functioned as expected, got a little jingle notification on the phone to remind me the doors are now locked, looked back to see that the sideview mirrors auto folded as expected.
Sponsored
