🙋‍♂️ What Did You Do To Your Lightning Today?

[GoodSam]

Sponsored

 

[GoodSam]

Installed the BAK Revolver X4s bed cover this evening, Pictures of some details here in a Flickr photo album:
https://flic.kr/s/aHBqjAfPAt

 

[TaxmanHog]

Installed the BAK Revolver X4s bed cover this evening, Pictures of some details here in a Flickr photo album:
https://flic.kr/s/aHBqjAfPAt

I like the knurled knob fasteners for quick removal you have, the Ford version requires a socket or wrench for removal, not that I am anticipating removing mine frequently, but needing no tools is a better option.

 

[queuewho]

Front seat covers and back seat protection and bridge for the furkids

do you happen to have a link to the bridge part? Looks like exactly what I need.

 

[swngdncr]

do you happen to have a link to the bridge part? Looks like exactly what I need.

Here you go

https://www.amazon.com/dp/B0BDYKN397?psc=1&ref=ppx_yo2ov_dt_b_product_details

 

[Jernat]

My 2023 F150 Lightning XLT in Antimatter Blue

FITCAMX

cargo net

Bakflip MX4

Spray in Liner and Rough Country Bed Mat

Husky WeatherBeater floor mats

 

[queuewho]

Here you go

https://www.amazon.com/dp/B0BDYKN397?psc=1&ref=ppx_yo2ov_dt_b_product_details

Thanks, ordered one. Nothing else on Amazon looks like it fits or isn't absolute crap.

 

[GoodSam]

@Jernat I like the Husky floor mats coverage…much much better coverage than the Weathertech mats, I think. Weathertech are heavy soft rubber, but require trimming, giving a rough edge. And I mistakenly got tan color mats because I did not pay attention, I do not even remember a color choice, as I was clicking too fast. Black would have matched better. But again, coverage at the door sills and none in the center of the back floor is missing. Not custom enough for the Lightning.

 

[vandy1981]

@Jernat Weathertech are heavy soft rubber, but require trimming, giving a rough edge.

We did not need to trim our Weathertech mats to fit. We have folding cargo divider under the back seat on our Lariat ER--maybe there is a difference in the trueness of fit the one designed for trucks without the divider.

 

[GoodSam]

did not need to trim our Weathertech mats to fit

These required trimming an edge that the factory leaves on for their plastic hangers to attach to.
https://www.weathertech.com/ford/20...-fold-flat-storage/no/?OrderItemId=2155563962
anf their picture shows the back mats matching up against each other, but their is a gap between them.
Coverage around the accelerator pedal is missing compared to the Husky, I think.
Update: I did return these and get the full floor version shown below, in black.

 

[seanocono]

Does anyone know or 3rd party steering wheel options? Am I the only one that feels like Ford is still using the same steering wheel parts bin from the 90s, but just stuck a bunch of buttons on it?

 

[MTLF150]

These required trimming an edge that the factory leaves on for their plastic hangers to attach to.
https://www.weathertech.com/ford/20...-fold-flat-storage/no/?OrderItemId=2155563962
anf their picture shows the back mats matching up against each other, but their is a gap between them.
Coverage around the accelerator pedal is missing compared to the Husky, I think.

Looks like you order the “all weather floor mats” that are not the same as the “floor liner “ versions that are larger and contoured for the lightning.

 

[AdmiralYamo]

Just doing truck things. 73 miles with 2 round bales, only 37% battery use. Then another 33 miles for 32 bales of hay. 30F, 45-55mph most of the way. Computer was saying about.1.7mi/kwh. Tows like a dream.

 

[GoodSam]

Napier Sportz truck tent series 57 with BAK revolver X4s bed cover test install, see Flickr photo album:
https://flic.kr/s/aHBqjAgbSJ
works OK, tent bottom fills under the space of the rolled up bed cover. Napier straps seem ok for going over the paint with a touch of extra protection at strap buckle points. Tried to get tent pole locations and strap tensions just right. Door flap rolled up in this photo. Would be interesting to try setting this up in the wind. Put poles into tent while it was on ground, not sure if I could do it while in the bed. Five foot six inches high inside tent. could sit in a chair comfortably, which i hope to do while trying to photograph the stars wirelessly. need to sneek 120V thru door for heated blanket. waiting for bedrug, but i will have a 38" wide pad as well.

 

[Firestop]

Napier Sportz truck tent series 57 with BAK revolver X4s bed cover test install, see Flickr photo album:
https://flic.kr/s/aHBqjAgbSJ
works OK, tent bottom fills under the space of the rolled up bed cover. Napier straps seem ok for going over the paint with a touch of extra protection at strap buckle points. Tried to get tent pole locations and strap tensions just right. Door flap rolled up in this photo. Would be interesting to try setting this up in the wind. Put poles into tent while it was on ground, not sure if I could do it while in the bed. Five foot six inches high inside tent. could sit in a chair comfortably, which i hope to do while trying to photograph the stars wirelessly. need to sneek 120V thru door for heated blanket. waiting for bedrug, but i will have a 38" wide pad as well.

Thanks for posting! My wife & I have been looking this tent and their upgraded version.…wondering why you chose this model?

FWIW, I’ve installed my BedRug…the most challenging part is cutting in the Power Center/lights/light switch. The BedRug comes with indents on the bedside to mark where to cut…I suggest only usinf them as a guide for placement, not a cut template. This video, not specifically for the BedRug, shows the best technique to achieve a pro install look IMHO. I used this technique when installing mine…worked perfectly!

Sponsored